Maintenance and Service Guide

3. Remove the top and bottom covers (2).
Reverse this procedure to install the top and bottom covers.
Back cover
Description Spare part number
Back cover with battery (1-cell, 5000-mAh, Li-ion, USB-charging, includes cable and power/
volume board actuator)
767953-001
Display panel assembly (7.0-in, FHD, LED, TouchScreen, includes front cover) 767957-001
Before removing the back cover, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the top and bottom covers (see
Top and bottom covers on page 15).
Remove the back cover:
16 Chapter 5 Removal and replacement procedures