Maintenance and Service Guide
Table Of Contents
7.
Remove the system board (3).
Reverse this procedure to install the system board.
Rear-facing webcamera
Description Spare part number
Rear-facing webcamera (includes cable) 743818-001
Before removing the rear-facing webcamera, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
Back cover on page 13), and then remove the following components:
a. Battery (see
Battery on page 14)
b. Middle frame (see
Middle frame on page 15)
c. System board (see
System board on page 21)
Rear-facing webcamera
23