Maintenance and Service Guide

Bottom speaker/vibrator module assembly
Description Spare part number
Bottom speaker/vibrator module assembly (includes bottom speaker cables, bottom speaker
mount, and double-sided adhesive)
751668-001
Before removing the bottom speaker/vibrator module assembly, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
Back cover on page 13).
5. Remove the battery (see
Battery on page 14).
6. Remove the middle frame (see
Middle frame on page 15).
Remove the bottom speaker/vibrator module assembly:
1. Disconnect the vibrator module cable (1) from the vibrator module.
2. Detach the bottom speaker/vibrator module assembly (2) from the display panel assembly. (The
bottom speaker/vibrator module assembly is attached to the display panel assembly with double-
sided adhesive.)
3. Remove the bottom speaker/vibrator module assembly.
Reverse this procedure to install the bottom speaker/vibrator module assembly.
Bottom speaker/vibrator module assembly
19