Maintenance and Service Guide

Front-facing webcamera
Description Spare part number
2-MP front-facing webcamera (includes cable) 751661-001
Before removing the front-facing webcamera, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
Back cover on page 13).
5. Remove the battery (see
Battery on page 14).
6. Remove the middle frame (see
Middle frame on page 15).
Remove the front-facing webcamera:
1. Disconnect the front-facing webcamera cable (1) from the system board.
2. Detach the front-facing webcamera (2) from the display panel assembly. (The front-facing
webcamera is attached to the display panel assembly with double-sided adhesive.)
3. Remove the front-facing webcamera and cable.
Reverse this procedure to install the front-facing webcamera.
18 Chapter 5 Removal and replacement procedures