Datasheet

5
HP V1410 Switch Series
Specifications (continued)
HP V1410-8 Switch (J9661A) HP V1410-16 Switch (J9662A)
Ports
Supports a maximum of 8 autosensing 10/100 ports Supports a maximum of 16 autosensing 10/100 ports
Physical characteristics
Dimensions
3.74(d) x 6.14(w) x 0.97(h) in. (9.5 x 15.6 x 2.46 cm) 4.21(d) x 8.21(w) x 1.73(h) in. (10.7 x 20.85 x 4.4 cm)
Weight
0.74 lb. (0.34 kg) 1.43 lb. (0.65 kg)
Memory and processor
96 KB 16 Kb EEPROM; packet buffer size: 2 Mb
Mounting
Wall, desktop, and under-table mounting Mounts in an EIA-standard 19 in. telco rack (hardware included); wall,
desktop, and under-table mounting
Performance
100 Mb Latency
< 3.7 µs (LIFO 64-byte packets) < 10.6 µs (LIFO 64-byte packets)
Throughput
up to 1.1 million pps (64-byte packets) up to 2.3 million pps (64-byte packets)
Switching capacity
1.6 Gbps 3.2 Gbps
MAC address table size
1040 entries 8192 entries
Environment
Operating temperature
32°F to 104°F (0°C to 40°C) 32°F to 104°F (0°C to 40°C)
Operating relative humidity
15% to 95% @ 104°F (40°C), noncondensing 15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage temperature
-40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity
15% to 90% @ 149°F (65°C), noncondensing 15% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 10,000 ft. (3 km) up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB Power: 0 dB
Electrical characteristics
Maximum heat dissipation
13 BTU/hr (13.72 kJ/hr) 13 BTU/hr (13.72 kJ/hr)
Voltage
100-240 VAC 100-240 VAC
DC voltage
12 V 12 V
Current
0.3 A 0.3 A
Maximum power rating
3.6 W 3.6 W
Frequency
50/60 Hz 50/60 Hz
Notes
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
The exact input voltage and frequency rating are determined by the specific
power adapter part number ordered. Please select the correct power adapter
country option.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
The exact input voltage and frequency rating are determined by the specific
power adapter part number ordered. Please select the correct power adapter
country option.
Safety
UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006
+ A11:2009
UL 60950-1; CSA C22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006
+ A11:2009
Emissions
FCC Rules Part 15, Subpart B Class A FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22 EN 55022 CISPR 22
EN
EN 55024, CISPR 24 EN 55024, CISPR 24
ESD
IEC 61000-4-2 IEC 61000-4-2
Radiated
IEC 61000-4-3 IEC 61000-4-3
EFT/Burst
IEC 61000-4-4 IEC 61000-4-4
Surge
IEC 61000-4-5 IEC 61000-4-5
Conducted
IEC 61000-4-6 IEC 61000-4-6
Power frequency magnetic field
IEC 61000-4-8 IEC 61000-4-8
Voltage dips and interruptions
IEC 61000-4-11 IEC 61000-4-11
Harmonics
IEC 61000-3-2 IEC 61000-3-2
Flicker
IEC 61000-3-3 IEC 61000-3-3
Notes
IEEE 802.3az Energy Efficient Ethernet protocol is supported by the HP
V1410-16 (J9662A) and HP V1410-24 (J9663A) Switches only
Services
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
Standards and protocols
(applies to all products in series)
General protocols
IEEE 802.1p Priority
IEEE 802.3ab 1000BASE-T
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X