User manual
Table Of Contents
- Using this Menu
- Battery Information
- Safety and Handling Precautions Camera Information
- Package Contents
- Getting Started
- Using the Touch Screen
- Recording Photos, Movies and Voices
- Taking Photos
- Using Voices Recording
- Recording Videos
- Using the Stabilizer Feature
- Setting the Zoom Control
- Using Flash Features
- Setting the Focus Mode
- Setting the Drive Mode
- Setting the AF Area/Face tracking/Touch Shot
- Using the Record Menu
- Setting the Scene Mode
- Setting Quality
- Setting EV Compensation
- Setting White Balance
- Setting ISO
- Setting Metering
- Setting AEB
- Setting AF area
- Setting AF Lamp
- Setting Sharpness
- Setting Saturation
- Setting Contrast
- Setting Flash
- Setting Drive Mode
- Setting Focus Mode
- Setting Color Mode
- Setting the Digital Zoom
- Setting the Date Stamp
- Setting Auto Review
- Pre-Record
- Playback
- Using the Setup Menu
- Making Connections
- Appendix
- Troubleshooting
- Getting Help
8
9
Turning the Power On and Off
Press the Power button to power on and off the camera.
Thestartupimagedisplaysbrieyandthestartupsoundplaysifenabled.•
This camera will also power up if the playback button is pressed •
. If pressed, the last recorded photo, video
clip, or audio clip will be displayed and the lens will not be extended.
To turn off the camera, press the Power button
, or the camera will automatically shut off when not used
for the selected Power Save (see page 65 for details) setting. The default setting is after 1 minute of inactivity.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of your camera. First
is the setup of language menu. Specify in which language menus and messages are to be displayed on the LCD
monitor.
Setting the Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
Tap1.
or to turn pages.
Tap the desired language button and apply.2.
Setting the Date & Time
Tap the screen to select Year/Month/Date or Hour/Minute.1.
Tap 2.
or to change the value for the date and time.
Tap 3.
to apply.
If necessary, press to close the menu.
At this point, the camera settings are set to the default automatic mode and is ready to take photos and videos.
To ensure accurate battery level display, please set the battery type to match installed batteries. See page 66
“Setting Battery Type” for details.
Holding down• or keys to change the values continuously.
If the camera is without battery power for more than 48 hours, the initial settings •
may reset and require another setup.