Installation Guide

Aruba 9012 Gateway
Startup Guide
The Aruba 9012 gateway is dual purpose gateway that supports both
SD-WAN and wireless LAN capabilities. The wireless LAN connects,
controls, and intelligently integrates wireless Access Points (APs),
Managed Devices, and Air Monitors (AMs). The gateway has the ability
to directly connect a branch to cloud, provide resilient connectivity
from the cloud, and centralized control for policy management across
all branches.
Package Contents
Aruba 9012 gateway
Power cable
Micro USB console cable
2 Rack mount brackets
8 M3 x 8 mm flat head screws
4 M6 x15 mm Phillips pan head screws
2 M6 x 7 mm grounding screws
4 Rubber feet
Aruba 9012 Start-up Guide (Printed)
Safety, Compliance, and Warranty Information (Printed)
Installation
This device must be professionally
installed and serviced by a trained Aruba-
Certified Mobility Professional (ACMP), or
similar Aruba-certified technician. To
install this device, refer to the Aruba 9012
Gateway Installation Guide by scanning the
QR code in this section, or visit
www.support.arubanetworks.com then
select Documentation> Hardware
Installation Guides> Controllers>
Aruba 9012 Gateway
Software End User License
Agreement
The End User License Agreement (EULA) information for this product
can be found at www.arubanetworks.com/assets/legal/EULA.pdf.
9012 Specifications
Physical
Device Dimensions (HxWxD): 3.95 cm x 26.00 cm x 4.37 cm
Device Weight: 7.54 lbs (3.42 kg)
Electrical
Ethernet
12 x 10/100/1000BASE-T auto-sensing Ethernet RJ-45 ports
The rack mounting kit available for use with the Aruba 9012
gateway is sold separately. Contact your Aruba sales
representative for details and assistance.
6 x PoE+ ports
MDI/MDX
2 x USB A 3.0 Ports
1 x Micro USB console port
1 x RJ-45 console port
Bluetooth
185 W AC Power Supply
AC Input Voltage: 100 V AC to 240 V AC
AC Input Current: 3 A at 100 Vrms
AC Input Frequency: 50 to 60 Hz
Environmental
Operating
Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
Humidity Range: 10% to 90% (RH), non-condensing
Storage and Transportation
Temperature Range: –40 °C to 70 °C (-40 °F to 158 °F)
Humidity Range: 10% to 95% (RH), non-condensing
Regulatory Model Name
The regulatory model name for the 9012 gateway is ARCN9012.
Safety and Regulatory Compliance
Aruba, a Hewlett Packard Enterprise company provides a multi-
language document that contains country-specific restrictions and
additional safety and regulatory information for all Aruba products.
This document can be viewed or downloaded from the following
location: www.arubanetworks.com/safety_addendum
FCC Class A Part 15
United States
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at their own expense.
This product complies with Part 15 of the FCC Rules. Operation is
subject to the following two
conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
Canada
This device contains license-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s
license-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference
that may cause undesired operation of the device
Cet appareil contient des émetteurs / récepteurs exempts de licence
qui sont conformes au (x) RSS (s) exemptés de licence d'Innovation,
Sciences et Développement économique Canada. L'opération est
soumise aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interférences(2) Cet appareil doit
accepter toute interférence, y compris les interférences pouvant
provoquer un fonctionnement indésirable de l'appareil.
!
Changes or modifications to this unit not expressly approved
by Aruba, a Hewlett Packard Enterprise company, can void
the user’s authority to operate this equipment.

Summary of content (4 pages)