User Guide SUMMARY This guide provides information about components, network connection, power management, security, backing up, and more.
© Copyright 2020 HP Development Company, L.P. AMD is a trademark of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Intel, Celeron, Pentium, and Thunderbolt are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Safety warning notice Reduce the possibility of heat-related injuries or of overheating the computer by following the practices described. WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Processor configuration setting (select products only) Important information about processor configurations. IMPORTANT: Select computer products are configured with an Intel® Pentium® N35xx/N37xx series or a Celeron® N28xx/N29xx/N30xx/N31xx series processor and a Windows® operating system. If your computer is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2 processors to 1 processor. If you do so, your computer will not restart.
vi Processor configuration setting (select products only)
Table of contents 1 Getting started ............................................................................................................................................. 1 Finding information ............................................................................................................................................... 1 2 Components ..................................................................................................................................................
Connecting Bluetooth devices ........................................................................................ 19 Using NFC to share information (select products only) .................................................................... 20 Connecting to a wired network ............................................................................................................................ 20 Connecting to a local area network (LAN) (select products only) ...........................................
Connecting to Intel WiDi certified displays ..................................................................... 31 Opening Intel WiDi ........................................................................................................... 31 Using data transfer .............................................................................................................................................. 31 Connecting devices to a USB Type-C port (select products only) ....................................
Enabling DriveLock and setting a DriveLock user password ......................................... 45 Disabling DriveLock ........................................................................................................ 46 Entering a DriveLock password ...................................................................................... 46 Changing a DriveLock password ..................................................................................... 46 Windows Hello (select products only) ......
Navigating and selecting in Computer Setup ................................................................................... 58 Restoring factory settings in Computer Setup ................................................................................. 58 Updating the BIOS ............................................................................................................................. 59 Determining the BIOS version ............................................................................
13 Electrostatic discharge ............................................................................................................................... 69 14 Accessibility .............................................................................................................................................. 70 HP and accessibility .............................................................................................................................................
1 Getting started This computer is a powerful tool designed to enhance your work and entertainment. Read this chapter to learn about best practices after you set up your computer and where to find additional HP resources. TIP: To quickly return to the computer Start screen from an open app or the Windows desktop, press the Windows key on your keyboard. Pressing the Windows key again returns you to the previous screen.
Table 1-1 Additional information (continued) Resource Contents Select the question mark icon in the taskbar search box. Then select Support. Safety & Comfort Guide To access this guide: ▲ Type HP Documentation in the taskbar search box, and then select HP Documentation.
2 Components Your computer features top-rated components. This chapter provides details about your components, where they are located, and how they work. Locating hardware Use these instructions to find out what hardware is installed on your computer. ▲ Type device manager in the taskbar search box, and then select the Device Manager app. A list displays all the devices installed on your computer.
Table 2-1 Right-side components and their descriptions (continued) Component Description Connects a display device that has a USB Type-C connector, providing DisplayPort™ output. NOTE: Cables, adapters, or both (purchased separately) might be required. (3) HDMI port Connects an optional video or audio device, such as a highdefinition television, any compatible digital or audio component, or a high-speed High Definition Multimedia Interface (HDMI) device.
Table 2-2 Left-side components and their descriptions (continued) Component Description (3) USB SuperSpeed port Connects a USB device, provides high-speed data transfer, and (for select products) charges small devices when the computer is on or in Sleep mode. (4) Audio-out (headphone)/Audio-in (microphone) combo jack Connects optional powered stereo speakers, headphones, earbuds, a headset, or a television audio cable. Also connects an optional headset microphone.
Table 2-3 Display components and their descriptions (continued) Component Description (2) Ambient light sensor (select products only) Adjusts the brightness of the display, depending on the ambient light. (3) Internal microphones (2) Record sound. (4) Camera light (select products only) On: One or more cameras are in use. (5) Camera(s) (select products only) Allow(s) you to video chat, record video, and record still images.
Turning on the touchpad Follow these steps to turn on the touchpad. 1. Type touchpad settings in the taskbar search box, and then press enter. 2. Using an external mouse, click the Touchpad button. If you are not using an external mouse, press the Tab key repeatedly until the pointer rests on the touchpad button. Then press the spacebar to select the button. Touchpad components Use the illustration and table to identify the touchpad components.
Table 2-5 Lights and their descriptions Component Description (1) Caps lock light On: Caps lock is on, which switches the key input to all capital letters. (2) Privacy key light (select products only) On: Privacy screen is on, which helps prevent side-angle viewing. (3) Mute light ● On: Computer sound is off. ● Off: Computer sound is on. ● On: Microphone is off. ● Off: Microphone is on. ● On: The computer is on.
IMPORTANT: To verify that your computer supports fingerprint reader sign-in, type Sign-in options in the taskbar search box and follow the on-screen instructions. If Fingerprint reader is not listed as an option, then your notebook does not include a fingerprint reader. Table 2-6 Button, speakers, and fingerprint reader and their descriptions Component Description (1) Speakers (2) Produce sound. (2) Power button ● When the computer is off, press the button briefly to turn on the computer.
Table 2-6 Button, speakers, and fingerprint reader and their descriptions (continued) Component Description ▲ Right-click the Power meter icon and then select Power Options. (3) Fingerprint reader (select products only) Allows a fingerprint logon to Windows, instead of a password logon. ▲ Touch your finger to the fingerprint reader. See Windows Hello (select products only) on page 47 for details.
Table 2-7 Special keys and their descriptions (continued) Component Description See Action keys on page 11. (5) Power button ● When the computer is off, press the button briefly to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep (select products only). ● When the computer is in Hibernation, press the button briefly to exit Hibernation.
Table 2-8 Action keys and their descriptions (continued) Icon Description Decreases the screen brightness incrementally as long as you hold down the key. Increases the screen brightness incrementally as long as you hold down the key. Mutes or restores speaker sound. Decreases speaker volume incrementally while you hold down the key. Increases speaker volume incrementally while you hold down the key. Mutes the microphone. Turns the keyboard backlight off or on.
NOTE: The action key feature is enabled at the factory. You can disable this feature by pressing and holding the fn key and the left shift key. The fn lock light will turn on. After you have disabled the action key feature, you can still perform each function by pressing the fn key in combination with the appropriate action key. Hot keys (select products only) A hot key is the combination of the fn key and another key. Use the table to identify the hot keys.
Labels The labels affixed to the computer provide information you might need when you troubleshoot system problems or travel internationally with the computer. Labels might be in paper form or imprinted on the product. IMPORTANT: Check the following locations for the labels described in this section: the bottom of the computer, inside the battery bay, under the service door, on the back of the display, or on the bottom of a tablet kickstand.
Table 2-12 Service label components (continued) Component (4) Serial number (5) Warranty period Table 2-13 Service label components Component (1) HP product name (2) Product ID (3) Serial number (4) Warranty period ● Regulatory label(s)—Provide(s) regulatory information about the computer. ● Wireless certification label(s)—Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use.
2. Insert the SIM card into the SIM card slot, and then press in on the SIM card until it is firmly seated. NOTE: Your SIM card or the SIM card slot in your computer might look different from the illustration in this section. NOTE: Your SIM card slot may have an icon to show which way the card should be inserted into the computer. To remove the SIM card, press in gently on the card to disengage the SIM lock, and then remove it from the slot.
3 Network connections Your computer can travel with you wherever you go. But even at home, you can explore the globe and access information from millions of websites by using your computer and a wired or wireless network connection. This chapter helps you get connected to that world. Connecting to a wireless network Your computer might be equipped with one or more wireless devices.
Connecting to a WLAN Before you can connect to a WLAN with this procedure, you must first set up internet access. NOTE: When you are setting up internet access in your home, you must establish an account with an internet service provider (ISP). To purchase internet service and a modem, contact a local ISP. The ISP will help set up the modem, install a network cable to connect your wireless router to the modem, and test the internet service. 1. Be sure that the WLAN device is on. 2.
Broadband information that is included with your computer or the mobile network operator might provide it separately from the computer. For information about HP Mobile Broadband and how to activate service with a preferred mobile network operator, see the HP Mobile Broadband information included with your computer. Using eSIM (select products only) Your computer might be equipped with an eSIM.
1. Type bluetooth in the taskbar search box, and then select Bluetooth and other devices settings. 2. Turn on Bluetooth, if it is not already turned on. 3. Select Add Bluetooth or other device, and then in the Add a device dialog box, select Bluetooth. 4. Select your device from the list, and then follow the on-screen instructions. NOTE: If the device requires verification, a pairing code is displayed.
1. Plug the network cable into the network jack (1) on the computer or on an optional docking device or expansion product. 2. Plug the other end of the network cable into a network wall jack (2) or router. NOTE: If the network cable contains noise suppression circuitry (3), which prevents interference from TV and radio reception, orient the circuitry end of the cable toward the computer.
Using HP MAC Address Pass Through (select products only) MAC Address Pass Through provides a customizable way of identifying your computer and its communications on networks. This system MAC address provides unique identification even when your computer is connected through a network adapter. This address is enabled by default. To customize MAC Address Pass Through: 1. Start Computer Setup (BIOS).
4 Navigating the screen Depending on your computer model, you can navigate the computer screen using one or more methods. ● Use touch gestures directly on the computer screen. ● Use touch gestures on the touchpad. ● Use an optional mouse or keyboard (purchased separately). ● Use an on-screen keyboard. ● Use a pointing stick. Using touchpad and touch screen gestures The touchpad helps you navigate the computer screen and control the pointer using simple touch gestures.
Two-finger slide (touchpad and precision touchpad) Place two fingers slightly apart on the touchpad zone and then drag them up, down, left, or right to move up, down, or sideways on a page or image. Two-finger tap (touchpad and precision touchpad) Tap two fingers on the touchpad zone to open the options menu for the selected object. NOTE: The two-finger tap performs the same function as right-clicking with a mouse.
Four-finger tap (touchpad and precision touchpad) By default, the four-finger tap opens the Action Center. Tap four fingers on the touchpad zone to perform the gesture. To change the function of this gesture on a precision touchpad, select Start, select Settings, select Devices, and then select Touchpad. Under Four-finger gestures, in the Taps box, select a gesture setting. Three-finger swipe (touchpad and precision touchpad) By default, the three-finger swipe switches between open apps and the desktop.
One-finger slide (touch screen) Use the one-finger slide to pan or scroll through lists and pages, or to move an object. ● To scroll across the screen, lightly slide one finger across the screen in the direction you want to move. ● To move an object, press and hold your finger on an object, and then drag your finger to move the object. Using an optional keyboard or mouse An optional keyboard or mouse allows you to type, select items, scroll, and perform the same functions as you do using touch gestures.
5 Entertainment features Use your HP computer for business or pleasure to meet with others via the camera, mix audio and video, or connect external devices like a projector, monitor, TV, or speakers. See Components on page 3 to locate the audio, video and camera features on your computer. Using a camera (select products only) Your computer has one or more cameras that enable you to connect with others for work or play. Most cameras allow you to video chat, record video, and record still images.
Connecting headsets You can connect a headset to the audio-out (headphone)/audio-in (microphone) combo jack on your computer. A stand-alone microphone can be plugged into a USB port. See your manufacturer's instructions. WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety, and Environmental Notices.
Connecting video devices using an HDMI cable (select products only) HDMI is the only video interface that supports high-definition video and audio. Connecting a high-definition TV or monitor using HDMI To see the computer screen image on a high-definition TV or monitor, connect the high-definition device according to the instructions. NOTE: 1. To connect an HDMI device to your computer, you need an HDMI cable, purchased separately. Connect one end of the HDMI cable to the HDMI port on the computer.
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. 2. On the Playback tab, select the name of the digital output device. 3. Select Set Default, and then select OK. Turning off HDMI audio Use these instructions to return the audio stream to the computer speakers. 1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select Playback devices. 2.
To discover and connect to Miracast-compatible wireless displays without leaving your current apps, follow these steps. ▲ Type project in the taskbar search box, and then select Project to a second screen. Select Connect to a wireless display, and then follow the on-screen instructions.
2. 32 Connect the other end of the cable to the external device.
6 Managing power Your computer can operate on either battery power or external power. When the computer is running on battery power and an external power source is not available to charge the battery, it is important to monitor and conserve the battery charge. Some power management features described in this chapter might not be available on your computer. Using Sleep and Hibernation Windows has two power-saving states, Sleep and Hibernation.
IMPORTANT: If you have set a password to be required on exiting Sleep, you must enter your Windows password before your work returns to the screen. Initiating and exiting Hibernation (select products only) You can enable user-initiated Hibernation and change other power settings and timeouts using Power Options. 1. Right-click the Power icon , and then select Power Options. 2. In the left pane, select Choose what the power buttons do (wording might vary by product). 3.
If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the following emergency procedures in the sequence provided: ● Press ctrl+alt+delete, select the Power icon, and then select Shut down. ● Press and hold the power button for at least 4 seconds. ● If your computer has a user-replaceable battery (select products only), disconnect the computer from external power, and then remove the battery.
Select the question mark icon in the taskbar. 2. Select Troubleshooting and fixes, and then in the Diagnostics section, select HP Battery Check. If HP Battery Check indicates that your battery should be replaced, contact support.
Resolving a low battery level when no power source is available Save your work and shut down the computer. Resolving a low battery level when the computer cannot exit Hibernation When the battery level is low and you cannot bring the computer out of Hibernation, connect the AC adapter. 1. Connect the AC adapter to the computer and to external power. 2. Exit Hibernation by pressing the power button.
38 ● The computer switches to battery power. ● The Power icon Chapter 6 Managing power changes appearance.
7 Security Computer security is essential for protecting the confidentiality, integrity, and availability of your information. Standard security solutions provided by the Windows operating system, HP applications, Computer Setup (BIOS), and other third-party software can help protect your computer from a variety of risks, such as viruses, worms, and other types of malicious code. NOTE: Some security features listed in this chapter might not be available on your computer.
Using passwords A password is a group of characters that you choose to secure your computer information. You can set several types of passwords, depending on how you want to control access to your information. You can set passwords in Windows or in Computer Setup, which is preinstalled on the computer. ● BIOS administrator, power-on, and DriveLock passwords are set in Computer Setup and are managed by the system BIOS. ● Windows passwords are set only in the Windows operating system.
Table 7-3 Types of Computer Setup passwords and their functions (continued) Password Function NOTE: If features have been enabled to prevent removing the BIOS administrator password, you may not be able to remove it until those features have been disabled. Power-on password ● Must be entered each time you turn on or restart the computer. ● If you forget your power-on password, you cannot turn on or restart the computer.
1. Start Computer Setup. ● Computers or tablets with keyboards: ▲ ● Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards: ▲ Turn off the tablet. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2. Enter your current BIOS administrator password. 3.
Entering a BIOS administrator password At the BIOS administrator password prompt, type your password (using the same keys that you used to set the password), and then press enter. After two unsuccessful attempts to enter the BIOS administrator password, you must restart the computer and try again. Using DriveLock Security Options DriveLock protection prevents unauthorized access to the contents of a hard drive. DriveLock can be applied only to the internal hard drives of the computer.
Disabling Automatic DriveLock To disable Automatic DriveLock, follow these steps. 1. Start Computer Setup. ● ● Computers or tablets with keyboards: 1. Turn off the computer. 2. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards: 1. Turn off the tablet. 2. Press the power button in combination with the volume down button until the Startup menu is displayed, and then tap f10 to enter Computer Setup. 2.
● The DriveLock user password and the DriveLock master password can be identical. Setting a DriveLock master password To set a DriveLock master password, follow these steps. 1. Start Computer Setup. ● ● Computers or tablets with keyboards: 1. Turn off the computer. 2. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup. Tablets without keyboards: 1. Turn off the tablet. 2.
4. Select Enable DriveLock and then press enter. 5. Carefully read the warning. 6. Follow the on-screen instructions to set a DriveLock user password and enable DriveLock. 7. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes. NOTE: If you are using arrow keys to highlight your choice, you must then press enter. Disabling DriveLock To disable DriveLock, follow these steps. 1. Start Computer Setup.
4. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press enter. 5. Select the hard drive you want to manage, and then press enter. 6. Make the selection for the DriveLock password that you want to change, and then follow the on-screen instructions to enter passwords. NOTE: The Change DriveLock Master Password option is visible only if the DriveLock master password was provided at the DriveLock Password prompt in step 3. 7.
Using firewall software Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be a software program that you install on your computer, network, or both, or it can be a solution made up of both hardware and software. There are two types of firewalls to consider: ● Host-based firewalls—Software that protects only the computer it is installed on.
HP DaaS helps protect devices against malware and other attacks, monitors device health, and helps reduce time spent solving device and security issues. You can quickly download and install the software, which is highly cost-effective relative to traditional in-house solutions. For more information, go to https://www.hptouchpointmanager.
8 Maintenance Performing regular maintenance keeps your computer in optimal condition. This chapter explains how to use tools like Disk Defragmenter and Disk Cleanup. It also provides instructions for updating programs and drivers, steps to clean the computer, and tips for traveling with (or shipping) the computer. Improving performance You can improve the performance of your computer by performing regular maintenance tasks with tools such as Disk Defragmenter and Disk Cleanup.
Identifying HP 3D DriveGuard status The hard drive light on the computer changes color to show that the drive in a primary hard drive bay, the secondary hard drive bay (select products only), or both are parked. Updating programs and drivers HP recommends that you update your programs and drivers regularly. Updates can resolve issues and provide new features and options. For example, older graphics components might not work well with the most recent gaming software.
1. Wear disposable gloves made of latex (or nitrile gloves, if you are latex-sensitive) when cleaning the surfaces. 2. Turn off your device and unplug the power cord and other connected external devices. Remove any installed batteries from items such as wireless keyboards. CAUTION: To prevent electric shock or damage to components, never clean a product while it is turned on or plugged in. 3. Moisten a microfiber cloth with water. The cloth should be moist, but not dripping wet. IMPORTANT: 4.
IMPORTANT: 4. To avoid damaging the surface, avoid abrasive cloths, towels, and paper towels. Wipe the exterior of the product gently with the moistened cloth. IMPORTANT: Keep liquids away from the product. Avoid getting moisture in any openings. If liquid makes its way inside your HP product, it can cause damage to the product. Do not spray liquids directly on the product. Do not use aerosol sprays, solvents, abrasives, or cleaners containing hydrogen peroxide or bleach that might damage the finish. 5.
IMPORTANT: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Airport conveyer belts and similar security devices that check carry-on baggage use X-rays instead of magnetism and do not damage drives. ● If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when you can use your computer. In-flight computer use is at the discretion of the airline.
9 Backing up, restoring, and recovering You can use Windows tools or HP software to back up your information, create a restore point, reset your computer, create recovery media, or restore your computer to its factory state. Performing these standard procedures can return your computer to a working state faster. IMPORTANT: If you will be performing recovery procedures on a tablet, the tablet battery must be at least 70% charged before you start the recovery process.
Creating a system restore System Restore is available in Windows. The System Restore software can automatically or manually create restore points, or snapshots, of the system files and settings on the computer at a particular point. When you use System Restore, it returns your computer to its state at the time you made the restore point. Your personal files and documents should not be affected.
1. Insert the HP Recovery media. 2. Access the system Startup menu. ● For computers or tablets with keyboards attached, turn on or restart the computer or tablet, quickly press esc, and then press f9 for boot options. ● For tablets without keyboards, turn on or restart the tablet, quickly press and hold the volume up button, and then select f9. ‒ or – Turn on or restart the tablet, quickly press and hold the volume down button, and then select f9. 3.
10 Computer Setup (BIOS), TPM, and HP Sure Start HP provides several tools to help set up and protect your computer. Using Computer Setup Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as hard drives, display, keyboard, mouse, and printer). Computer Setup includes settings for types of devices installed, the startup sequence of the computer, and amount of system and extended memory.
1. Start Computer Setup. See Using Computer Setup on page 58. 2. Select Main, select Apply Factory Defaults and Exit, and then select Yes. NOTE: If you are using arrow keys to highlight your choice, you must then press enter. NOTE: On select products, the selections might display Restore Defaults instead of Apply Factory Defaults and Exit. Your changes go into effect when the computer restarts. NOTE: Your password settings and security settings are not changed when you restore the factory settings.
1. Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Select the question mark icon in the taskbar. 2. Select Updates, and then select Check for updates and messages. 3. Follow the on-screen instructions. 4. At the download area, follow these steps: a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your computer. Make a note of the date, name, or other identifier.
IMPORTANT: Before enabling Trusted Platform Module (TPM) functionality on this system, you must ensure that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or licenses must be obtained if applicable. For any compliance issues arising from your operation or usage of TPM that violates the previously mentioned requirement, you shall bear all the liabilities wholly and solely. HP will not be responsible for any related liabilities.
11 Using HP PC Hardware Diagnostics You can use the HP PC Hardware Diagnostics utility to determine whether your computer hardware is running properly. The three versions are HP PC Hardware Diagnostics Windows, HP PC Hardware Diagnostics UEFI (Unified Extensible Firmware Interface), and (for select products only) Remote HP PC Hardware Diagnostics UEFI, a firmware feature.
Accessing HP PC Hardware Diagnostics Windows from Support Assistant After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from HP Support Assistant. To access HP PC Hardware Diagnostics Windows from HP Support Assistant: 1. Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Select the question mark icon in the taskbar. 2. Select Troubleshooting and fixes. 3. Select Diagnostics, and then select HP PC Hardware Diagnostics Windows.
1. Go to http://www.hp.com/support. 2. Select Software and Drivers, select your type of product, and then enter the product name or number in the search box that is displayed. 3. In the Diagnostics section, select Download, and then follow the on-screen instructions to select the specific Windows diagnostics version to be downloaded to your computer or USB flash drive. The tool downloads to the selected location.
a. Connected USB flash drive NOTE: To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see Downloading the latest HP PC Hardware Diagnostics UEFI version on page 65. 3. b. Hard drive c. BIOS When the diagnostic tool opens, select a language, select the type of diagnostic test you want to run, and then follow the on-screen instructions.
Downloading Remote HP PC Hardware Diagnostics UEFI HP Remote PC Hardware Diagnostics UEFI is also available as a SoftPaq that you can download to a server. Downloading the latest Remote HP PC Hardware Diagnostics UEFI version You can download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive. 1. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed. 2. Select Download Remote Diagnostics, and then select Run.
12 Specifications When you travel with or store your computer, the input power ratings and operating specifications provide helpful information. Input power The power information in this section might be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100 V–240 V, 50 Hz–60 Hz.
Operating environment Use the operating specifications for helpful information when you travel with or store your computer. Table 12-2 Operating environment specifications Factor Metric U.S.
13 Electrostatic discharge Electrostatic discharge is the release of static electricity when two objects come into contact—for example, the shock you receive when you walk across the carpet and touch a metal door knob. A discharge of static electricity from fingers or other electrostatic conductors may damage electronic components.
14 Accessibility HP's goal is to design, produce, and market products, services, and information that everyone everywhere can use, either on a stand-alone basis or with appropriate third-party assistive technology (AT) devices or applications. HP and accessibility Because HP works to weave diversity, inclusion, and work/life into the fabric of the company, it is reflected in everything HP does.
International Association of Accessibility Professionals (IAAP) IAAP is a not-for-profit association focused on advancing the accessibility profession through networking, education, and certification. The objective is to help accessibility professionals develop and advance their careers and to better enable organizations to integrate accessibility into their products and infrastructure. As a founding member, HP joined to participate with other organizations to advance the field of accessibility.
If you need additional support with the accessibility features on your HP product, see Contacting support on page 74.
● Understandable (by addressing readability, predictability, and input assistance) ● Robust (for instance, by addressing compatibility with assistive technologies) Legislation and regulations Accessibility of IT and information has become an area of increasing legislative importance. These links provide information about key legislation, regulations, and standards.
● California State University, Northridge, Center on Disabilities (CSUN) ● University of Wisconsin - Madison, Trace Center ● University of Minnesota computer accommodations program Other disability resources Many resources, including these examples, provide information about disabilities and age-related limitations.
Index A accessibility 70 accessibility needs assessment action keys 11 identifying 11 using 11 administrator password 40 airplane mode key 17 antivirus software 47 assistive technology (AT) finding 71 purpose 70 AT (assistive technology) finding 71 purpose 70 audio 27 HDMI 29, 30 headphones 27 headsets 28 sound settings 28 speakers 27 Automatic DriveLock disabling 44 enabling 43 Automatic Drivelock selecting 43 Automatic DriveLock password entering 44 71 B backup, creating 55 backups 55 battery conserving
hot keys using 13 HP 3D DriveGuard 50 HP Assistive Policy 70 HP Client Security 48 HP Device as a Service (HP DaaS) 48 HP Fast Charge 35 HP LAN-Wireless Protection 21 HP MAC Address Pass Through 22 HP PC Hardware Diagnostics UEFI downloading 65 starting 64 using 64 HP PC Hardware Diagnostics Windows accessing 62, 63 downloading 63 installing 64 using 62 HP Recovery media recovery 56 HP resources 1 HP Sure Recover 57 HP Touchpoint Manager 48 I initiating Sleep and Hibernation 33 input power 67 International
three-finger swipe touchpad gesture 25 three-finger tap touchpad gesture 24 touch screen gestures one-finger slide 26 touchpad settings 6, 7 using 23 touchpad and touch screen gestures tap 23 two-finger pinch zoom 23 touchpad gestures four-finger swipe 25 four-finger tap 25 three-finger swipe 25 three-finger tap 24 two-finger slide 24 two-finger tap 24 TPM settings 60 transfer data 31 traveling with the computer 14, 53 turning off the computer 34 two-finger pinch zoom touchpad and touch screen gesture 23 tw
