User Manual
Table Of Contents
- Getting started
- Important safety information
- More HP resources
- Getting to know your monitor
- Setting up the monitor
- Using the monitor
- Downloading software and utilities
- Downloading HP Display Center
- The Information file
- The Image Color Matching file
- Using the OSD menu
- Using the OSD function buttons
- Reassigning the function buttons
- Changing the Power Mode setting (select products only)
- Using Auto-Sleep Mode (select products only)
- Using the camera
- Setting up Windows Hello facial recognition
- DisplayPort multistreaming (select models)
- USB Type-C mode and Display Only mode
- Support and troubleshooting
- Maintaining the monitor
- Technical specifications
- Accessibility
- Index
3. Swivel the monitor head to the left or right for the best viewing angle.
4. You can pivot the monitor head from landscape to portrait orientation viewing to adapt to your
application (select models).
a. Adjust the monitor to full height position and tilt the monitor back to full tilt position (1).
b. Pivot the monitor clockwise or counterclockwise 90° from landscape to portrait orientation (2).
IMPORTANT: If the monitor is not in full height and full tilt position when pivoting, the bottom
right corner of the monitor panel will come in contact with the base and potentially cause damage
to the monitor.
If you are adding an optional speaker bar to the monitor, install it after pivoting the monitor. The
speaker bar will come in contact with the base when the monitor pivots and potentially cause
damage to the monitor or speaker bar.
NOTE: Use the operating system's display settings to rotate the image on the screen from portrait
to landscape. To rotate the OSD from portrait to landscape, open the OSD menu and select Menu,
select Menu Rotation, and then select Portrait.
18
Chapter 1 Getting started