User Manual
Table Of Contents
- Getting started
- Important safety information
- More HP resources
- Getting to know your monitor
- Setting up the monitor
- Using the monitor
- Downloading software and utilities
- Downloading HP Display Center
- The Information file
- The Image Color Matching file
- Using the OSD menu
- Using the OSD function buttons
- Reassigning the function buttons
- Changing the Power Mode setting (select products only)
- Using Auto-Sleep Mode (select products only)
- Using the camera
- Setting up Windows Hello facial recognition
- DisplayPort multistreaming (select models)
- USB Type-C mode and Display Only mode
- Support and troubleshooting
- Maintaining the monitor
- Technical specifications
- Accessibility
- Index
● Connect one end of an HDMI cable to the HDMI port on the rear of the monitor and the other end to
the HDMI port on the source device.
● Connect one end of a USB Type-C cable to the USB Type-C port on the rear of the monitor and the
other end to the USB Type-C port on the source device. (Use only the HP-approved USB Type-C cable
provided with the monitor.)
NOTE: The monitor’s USB Type-C port provides network, data, video, and power delivery (up to 65
W).
The host device must be able to support DisplayPort Alt Mode (video, charging, and USB 3.1) over
the USB Type-C connector.
3. Connect one end of the power cord to the power connector on the monitor and the other end to a
grounded AC outlet.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
Connecting the cables
15