User Manual
Table Of Contents
- Getting started
- Important safety information
- More HP resources
- Getting to know your monitor
- Setting up the monitor
- Using the monitor
- Downloading software and utilities
- Downloading HP Display Center
- The Information file
- The Image Color Matching file
- Using the OSD menu
- Using the OSD function buttons
- Reassigning the function buttons
- Changing the Power Mode setting (select products only)
- Using Auto-Sleep Mode (select products only)
- Using the camera
- Setting up Windows Hello facial recognition
- DisplayPort multistreaming (select models)
- USB Type-C mode and Display Only mode
- Support and troubleshooting
- Maintaining the monitor
- Technical specifications
- Accessibility
- Index
2. Rotate the stand down until it snaps into place (2).
3. Place the base on the bottom the stand (1), and swivel the base counterclockwise to lock it in place (2).
4. Conrm that the arrows on the base are aligned (3). Then insert the two thumbscrews into the base and
tighten them (4).
Mounting the monitor head
To attach your monitor to a wall using a swing arm or other mounting
xture, follow the steps in this section
to safely and securely connect your monitor.
IMPORTANT: This monitor supports the VESA industry-standard 100 mm mounting holes. To attach a third-
party mounting solution to the monitor head, use four 4 mm, 0.7 pitch, and 10 mm long screws. Longer
screws might damage the monitor. Be sure that the manufacturer’s mounting solution is compliant with the
VESA standard and is rated to support the weight of the monitor head. For best performance, use the power
and video cables provided with the monitor.
NOTE: This apparatus is intended to be supported by a UL-listed or CSA-listed wall-mount bracket.
Mounting the monitor head
11