Quick Start Guide

QuickSpecs
HP ProDesk 400 G6 DM / AIO – G7 MT / SFF
Standard Features and Configurable Components (availability may vary by country)
Not all configuration components are available in all regions/countries.
c06640086 – DA 16665 – Worldwide — Version 2 — August 26, 2020
Page 40
Spare parts are available throughout the warranty period and or for up to “5” years after the end of
production.
Batteries
This battery(s) in this product comply with EU Directive 2006/66/EC
Batteries used in the product do not contain:
Mercury greater than 1ppm by weight
Cadmium greater than 20ppm by weight
Battery size: CR2032 (coin cell)
Battery type: Lithium
Additional Information
• This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive -
2011/65/EC.
• This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE)
Directive – 2002/96/EC.
• This product is in compliance with California Proposition 65 (State of California; Safe Drinking Water
and Toxic Enforcement Act of 1986).
• Plastics parts weighing over 25 grams used in the product are marked per ISO11469 and ISO1043.
• This product contains a minimum of 50% post-consumer recycled (PCR) plastic (by wt.); including
10% ITE-derived post-consumer recycled plastic.*
• This product is 95.1% recycle-able when properly disposed of at end of life.
*Recycled plastic content percentage is based on the definition set in the IEEE 1680.1-2018 standard.
Packaging Materials
(vary by country)
External:
PAPER/Corrugated
1605 g
Internal:
PLASTIC/Polyethylene Expanded - EPE
683 g
PLASTIC/Polyethylene low density - LDPE
42 g
Material Usage
This product does not contain any of the following substances in excess of regulatory limits (refer to
the HP General Specification for the Environment at
http://www.hp.com/hpinfo/globalcitizenship/environment/pdf/gse.pdf):
• Asbestos
• Certain Azo Colorants
• Certain Brominated Flame Retardants – may not be used as flame retardants in plastics
• Cadmium
• Chlorinated Hydrocarbons
• Chlorinated Paraffins
• Formaldehyde
• Halogenated Diphenyl Methanes
• Lead carbonates and sulfates
• Lead and Lead compounds
• Mercuric Oxide Batteries
• Nickel – finishes must not be used on the external surface designed to be frequently handled or
carried by the user.
• Ozone Depleting Substances
• Polybrominated Biphenyls (PBBs)
• Polybrominated Biphenyl Ethers (PBBEs)
• Polybrominated Biphenyl Oxides (PBBOs)
• Polychlorinated Biphenyl (PCB)
• Polychlorinated Terphenyls (PCT)
• Polyvinyl Chloride (PVC) – except for wires and cables, and certain retail packaging has been
voluntarily removed from most applications.
• Radioactive Substances
• Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)