Quick Start Guide

QuickSpecs
HP ProDesk 400 G6 DM / AIO – G7 MT / SFF
Overview
Not all configuration components are available in all regions/countries.
c06640086 – DA 16665 – Worldwide — Version 2 — August 26, 2020
Page 4
HP ProDesk 400 G7 Small Form Factor PC
1.
Audio-out connector
7.
(2) Type-A Hi-Speed USB 480Mbps signaling rate port
(Supporting wake from S4/S5 with keyboard/mouse
connected and enabled in BIOS)
2.
HDMI 1.4
3.
Serial Port (Optional)
8.
(3) Type-A SuperSpeed USB 5Gbps signaling rate port
4.
Dual-Mode DisplayPort™ 1.4 (DP++)
9.
Power cord connector
5.
Flex Port, choice of:
10.
Internal WLAN antenna cover (optional)
• DisplayPort™1.4
• HDMI 2.0
• VGA
• Serial
11.
Standard cable lock slot
12.
Integrated accessory cable lock
• Dual Type-A SuperSpeed USB 5Gbps signaling rate
• Type-C® SuperSpeed USB 10Gbps signaling rate with
DisplayPort™ Alt mode
6.
RJ45 network connector
Not Shown
Port
Bay
Optional PS/2 (2 ports) & serial port card
1
(connected with
mainboard via flyer cable)
(1) 9.5mm internal optical drive bay
(1) 3.5" internal storage drive bay or (2) 2.5" internal
storage drive bays
2
Optional parallel port
1
Optional 4 serial port PCIe card
1
1. Each of the legacy options will occupy one rear slot.
2. SFF can be configured with either (1) 3.5” or (2) 2.5” internal storage drive (2.5-inch drive needs adapter that can only be purchased when
configuring the PC from factory with a 2.5” drive)