User Manual
Table Of Contents
- Getting started
- Using the monitor
- Downloading software and utilities
- The Information file
- The Image Color Matching file
- Using the OSD menu
- Changing the Power Mode setting (select products only)
- Using Auto-Sleep Mode (select products only)
- Using PiP and PbP (select products only)
- Using low blue light mode (select products only)
- DisplayPort multistreaming over DisplayPort or USB Type-C (select models only)
- Support and troubleshooting
- Maintaining the monitor
- Technical specifications
- Accessibility
1. Be sure that DisplayPort or USB Type-C is your primary video input.
2. Add a second monitor by connecting a DisplayPort cable between the DisplayPort OUT connector on the
primary monitor and the DisplayPort connector on a secondary monitor.
3. Set a connected monitor to display the same image as the primary monitor or a dierent image.
4. To connect additional monitors (up to four maximum), press the center of the OSD controller to open the
OSD menu. Navigate to the USB Type-C conguration and select USB-C Video+USB2.0.
NOTE: All but the nal monitor in the chain must support DisplayPort multistreaming. For example
when daisy-chaining four monitors, three of the four daisy-chained monitors need to have DisplayPort
and DisplayPort OUT connectors. The last monitor in the chain needs only a DisplayPort connector.
5. Connect the DisplayPort cable from the DisplayPort OUT connector of one monitor to the DisplayPort
connector of the next monitor.
20 Chapter 2 Using the monitor