User Manual
Table Of Contents
- Getting started
- Using the monitor
- Downloading software and utilities
- The Information file
- The Image Color Matching file
- Using the OSD menu
- Changing the Power Mode setting (select products only)
- Using Auto-Sleep Mode (select products only)
- Using PiP and PbP (select products only)
- Using low blue light mode (select products only)
- DisplayPort multistreaming over DisplayPort or USB Type-C (select models only)
- Support and troubleshooting
- Maintaining the monitor
- Technical specifications
- Accessibility
4. Lift the stand up and away from the monitor (2).
Attaching the monitor head to a mounting device
You might need additional tools such as a screwdriver (purchased separately) when you attach a mounting
device. To avoid damage to your monitor, follow these instructions.
1. Remove the two screws from the stand mount on the back of the monitor head (1).
2. Lift the stand mount o of the monitor head (2).
3. Align the VESA mounting plate with the two VESA screw holes (3), and then tighten the screws (4).
8 Chapter 1 Getting started