User Manual
Table Of Contents
- Getting started
- Using the monitor
- Downloading software and utilities
- The Information file
- The Image Color Matching file
- Using the OSD menu
- Customizing the monitor
- Changing the Power Mode setting
- Using Auto-Sleep Mode
- Using PIP and PbP
- Using low blue light mode
- Adjusting blue light output
- DisplayPort multistreaming over USB Type-C or DisplayPort
- Support and troubleshooting
- Maintaining the monitor
- Technical specifications
- Accessibility
Table A-2 Technical specications
Specication Measurement
Display, wide-screen 68.6 cm 27 in
Type VA
Viewable image size 68.6 cm diagonal 27 in diagonal
Maximum weight (unpacked) 7.8 kg 17.2 lbs
Dimensions (include base)
Height (highest position) 52.9 cm 20.8 in
Height (lowest position) 37.9 cm 14.92 in
Depth 21.5 cm 8.5 in
Width 60.8 cm 23.9 in
Tilt –5° to 20°
Swivel ± 45°
Environmental requirements temperature
Operating temperature 5°C to 35°C 41°F to 95°F
Storage temperature –40°C to 65°C –40°F to 149°F
Storage humidity 5% to 95% (noncondensing)
Power source 100 V ac to 240 V ac 50/60 Hz
Input terminal One HDMI port, one DisplayPort connector, and one USB Type-C connector
Preset display resolutions
The following display resolutions are the most commonly used modes and are set as factory defaults. The
monitor automatically recognizes these preset modes, and they will appear properly sized and centered on
the screen.
Preset display resolutions 63.5 cm (25 in) model
This section provides preset display resolutions and preset timing resolutions.
Table
A-3 Preset display resolutions
Preset Pixel format Horz freq (kHz) Vert freq (Hz)
1 640 × 480 31.469 59.940
2 720 × 400 31.469 70.087
3 800 × 600 37.879 60.317
4 1024 × 768 48.363 60.004
5 1280 × 720 45.000 60.000
6 1280 × 800 49.702 59.810
7 1280 × 1024 63.981 60.020
30 Appendix A Technical specications