User manual

13 Maintenance
It is important that you perform simple maintenance of your tablet to be sure that it works at peak
performance.
Cleaning your tablet
Use one of the following IP 52-compliant products to safely clean your tablet:
CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on
any tablet port surface. Liquids dripped on the surface can permanently damage internal components. Close
all ports and I/O doors.
●
Benzyl-C12-18-alkyldimethyl ammonium chlorides < 1%
●
N-Alkyl dimethyl benzyl ammonium chloride 5%–10%, didecyl dimethyl ammonium chloride 5%–10%,
ethyl alcohol 1%–5%, and lauryl dimethyl amine oxide 0.1%–1.5%
●
Ethylene glycol n-hexyl ether 0.1%–1.0%, isopropanol 1%–5%, and water 90%–95%
●
Sodium hypochlorite 1%–5% with sodium hydroxide 0.5%–2%
●
Gentle dish soap and water
●
Dry microber cleaning cloth or a chamois (static-free cloth without oil)
●
Static-free cloth wipes
CAUTION: Avoid strong cleaning solvents that can permanently damage your tablet. If you are not sure that
a cleaning product is safe for your tablet, check the product contents to make sure that ingredients such as
alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons are not included in the product.
Fibrous materials, such as paper towels, can scratch the tablet. Over time, dirt particles and cleaning agents
can get trapped in the scratches.
Cleaning procedures
Follow the procedures in this section to safely clean your tablet.
WARNING! To prevent electric shock or damage to components, do not attempt to clean your tablet while it
is turned on:
●
Turn o the tablet.
●
Disconnect external power.
●
Disconnect all powered external devices.
Cleaning the display
Gently wipe the sides and the surface of the display using a soft, lint-free cloth moistened with an alcohol-
free glass cleaner.
Cleaning your tablet 35