Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement preliminary requirements
- Removal and replacement procedures for Authorized Service Provider parts
- Specifications
- Backing up and recovering your data
- Power adapter requirements
- Recycling
- Index
Power/volume button board
Description Spare part number
Power/volume button board ((includes cable) 833752-001
Before removing the power/volume button board, follow these steps:
1. Turn o the tablet. If you are unsure whether the tablet is o, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 11).
5. Remove the battery (see Battery on page 13).
6. Remove the speaker (see Speaker on page 14).
7. Remove the rear-facing webcamera (see Rear-facing webcamera on page 14).
8. Remove the antenna board (see Antenna board on page 16).
9. Remove the touch screen board (see Touch screen board and display cable on page 17).
Remove the power/volume button board:
▲
Disconnect the power/volume button board (1) from the system board and remove it.
Reverse this procedure to install the power/volume button board.
18 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts