Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement preliminary requirements
- Removal and replacement procedures for Authorized Service Provider parts
- Specifications
- Backing up and recovering your data
- Power adapter requirements
- Recycling
- Index
Antenna board
Before removing the antenna board, follow these steps:
1. Turn o the tablet. If you are unsure whether the tablet is o, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 11).
5. Remove the battery (see Battery on page 13).
6. Remove the speaker (see Speaker on page 14).
7. Remove the rear-facing webcamera (see Rear-facing webcamera on page 14).
Remove the antenna board:
▲
Remove the antenna board (1) without detaching the soldered connection.
Reverse this procedure to install the antenna board.
16 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts