Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement preliminary requirements
- Removal and replacement procedures for Authorized Service Provider parts
- Specifications
- Backing up and recovering your data
- Power adapter requirements
- Recycling
- Index
1. Turn o the tablet. If you are unsure whether the tablet is o, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 11).
5. Remove the battery (see Battery on page 13).
6. Remove the speaker (see Speaker on page 14).
Remove the rear-facing webcamera:
1. Release the ZIF connector (1) that secures the rear-facing webcamera to the system board.
2. Remove the rear-facing webcamera (2).
Reverse this procedure to install the rear-facing webcamera.
Rear-facing webcamera 15