Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement preliminary requirements
- Removal and replacement procedures for Authorized Service Provider parts
- Specifications
- Backing up and recovering your data
- Power adapter requirements
- Recycling
- Index
Speaker
Description Spare part number
Speaker Kit (includes cable) 833747-001
Before removing the speaker, follow these steps:
1. Turn o the tablet. If you are unsure whether the tablet is o, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 11).
5. Remove the battery (see Battery on page 13).
▲
Remove the speaker (2) from the speaker frame without detaching the soldered connection (1) from the
system board.
Reverse this procedure to install the speaker.
Rear-facing webcamera
Description
Spare part number
Rear-facing webcamera (includes cable) 833745-001
Before removing the rear-facing webcamera, follow these steps:
14 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts