Specifications

Unpacking the new chassis
Unpack the new chassis and place it on a sturdy table. Save the packaging materials to return the
old chassis.
Replacing the base chassis
CAUTION:
Lift the chassis from the side edges. Lifting the chassis from the magazine openings can damage the
chassis.
1. The shipping lock prevents the robotic transport mechanism from moving during shipment. You
must remove the shipping lock before powering on the device. The shipping lock is held in place
with a piece of tape and is located in the top center of the new chassis. After the shipping lock
is removed, it should be stored on the back panel of the chassis for future use.
To remove and store the shipping lock:
a. Locate the tape and lock at the top of the chassis (see Figure 85).
Figure 85 Shipping lock location
.
b. Remove the tape, then remove the lock.
c. Store the lock on the back panel of the device.
Upgrading and servicing the Tape Autoloader166