Specifications

Details and SolutionDescriptionEvent code
• Check cleaning tape and exchange if
necessary.
• Retry the operation.
Cleaning failure. Cleaning process could not
be performed.
61
Exchange the cleaning tape.Cleaning tape expired.62
• Verify that the cartridge generation and
technology are supported by the device.
See “Tape cartridges” on page 43.
• Retry the operation.
• If problems persist, exchange the data
cartridge.
Invalid cartridge. Drive has rejected the
cartridge as invalid.
63
Invalid cleaning cartridge. Drive has rejected
the cartridge as invalid.
64
• Retry the operation.
• If problems persist, exchange the data
cartridge.
Invalid upgrade cartridge. Drive has rejected
the cartridge as invalid.
65
The diagnostic test needs to write data but
the tape being used for the test is write
protected. Ensure that the device has a tape
that is not write protected for use during the
diagnostic test.
Diagnostic tape write protect.66
The drive tried to read or write data from a
tape from an incompatible LTO generation.
For compatibility information see Backward
read compatibility, page 47.
Incompatible medium67
Check the SCSI cable connection and verify
that the maximum cable length is not
exceeded. Verify that the SCSI bus is properly
terminated.
SCSI message error70
SCSI parity error71
SCSI invalid message72
The application software made an illegal
request.
SCSI: overlapped command attempt73
SCSI: echo buffer overwritten74
Recovered error move operation. No action
required. Occasional retries are normal
operation.
Movement retry. Robotics movement did not
succeed but was successful on a retry.
80
• Check the tape drive fan on the Autoload-
er back panel to see whether the fan is
operational and not obstructed.
NOTE:
Fan only operates when cooling is
required.
Drive sled fan alert. Fan motion has stopped.81
Clean the tape drive using a valid cleaning
tape.
Clean request from the tape drive82
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide 151