Datasheet

Note 3 These Modules install to the following switches: (Use #0D1 if switch is CTO) - if applicable
HP 10512 Switch Chassis JC748A
Note 4 If more than 1 Fabric Module is selected, they must be of the same Type.
Management Modules
System (standard 0 // maximum 2) User Selection (minimum 1 // maximum 2) per enclosure
HP 10500 Main Processing Unit JC614A
See Configuration
Note:1
HP 10500 Type A MPU w/Comware v7 OS JG496A
See Configuration
Note:1,2
HP 10500 Type A MPU w/Comware v7 OS JG496A
See Configuration
Note:1,2,3
Configuration Rules:
Note 1 If 2 Management Module are selected, they must be the same Sku number.
Note 2 Note in Watson: This MPU supports CWv7 only and may not have some features from CWv5.
Note 3 The following Interface Modules are Not Supported with this Management
Module:
HP 10500/7500 Advanced VPN Firewall Module JD249A
HP 7500 Load Balancing Module JD252A
HP 10500/7500 SSL VPN Module with 500-user License JD253A
HP 10500/7500 NetStream Monitoring Module JD254A
Remarks: For Switch 10504, these modules can only be inserted into Slots 0 and 1. For Switches 10508 and 10508-
V, these modules can only be inserted into Slots 4 and 5. For Switch 10512, these modules can only be
inserted into Slots 6 and 7.
Transceivers
SFP Transceivers
HP X110 100M SFP LC LH40 Transceiver JD090A
HP X110 100M SFP LC LH80 Transceiver JD091A
QuickSpecs
HP 10500 Switch Series
Configuration
DA - 14167 EMEA — Version 23 — March 31, 2014 Page 19