QuickSpecs HP 10500 Switch Series Overview Product overview The HP 10500 Switch Series sets a new benchmark for performance, reliability, and scalability with next-generation Clos architecture. Designed for enterprise campus core networks, the 10500 Switch Series enables a cloud-connected and rich-media-capable infrastructure. The switch series provides industry-leading 10GbE/40GbE port density, 3-microsecond latency, and very low energy consumption.
QuickSpecs HP 10500 Switch Series Overview HP 10508 Switch Chassis HP 10508-V Switch Chassis Key features Advanced, next-generation Clos architecture More than 11 terabits-per-second switching capacity Feature-rich switch with IPv6 and MPLS functionality HP IRF technology virtualizes up to four chassis Ultra-high 1/10/40GbE density; 100GbE ready Features and benefits Product architecture Advanced Comware modular operating system brings native high stability, independent process monitoring, and restart
QuickSpecs HP 10500 Switch Series Overview control-plane events NEW Multitenant Device Context (MDC) Virtualizes a physical switch into multiple logical devices, with each logical switch having its own processes, configuration, and administration Performance High-speed fully distributed architecture provides up to 11.52 Tb/s switching capacity with released line cards and up to 13.
QuickSpecs HP 10500 Switch Series Overview port, and DiffServ Bandwidth shaping Port-based rate limiting provides per-port ingress-/egress-enforced increased bandwidth Classifier-based rate limiting uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port Reduced bandwidth provides per-port, per-queue egress-based reduced bandwidth Traffic policing supports Committed Access Rate (CAR) and line rate Weighted random early detection (WRED)/random early detection (RED)
QuickSpecs HP 10500 Switch Series Overview Ultrafast protocol convergence (sub second) with standard-based failure detection—Bidirectional Forwarding Detection (BFD) Enables link connectivity monitoring and reduces network convergence time for the routing information protocol (RIP), OSPF, BGP, IS-IS, VRRP, MPLS, and IRF Smart link allows 100 ms failover between links (Comware v5 only) Multiple internal power supplies provides high reliability; 10504 switch provides 3+1 redundancy; 10508, 10508-V, and 1051
QuickSpecs HP 10500 Switch Series Overview quality parameters such as jitter, TCP, or FTP connection delays and file transfer rates; allows a network manager to determine overall network performance and to diagnose and locate network congestion points or failures Information center provides a central repository for system and network information; aggregates all logs, traps, and debugging information generated by the system and maintains them in order of severity; outputs the network information to multipl
QuickSpecs HP 10500 Switch Series Overview Dynamic Host Configuration Protocol (DHCP) simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets Domain Name System (DNS) provides a distributed database that translates domain names and IP addresses, which simplifies network design; supports client and server Layer 3 routing Static IPv4 routing provides simple manually configured IPv4 routing Routing Information Protocol (RIP) uses a dista
QuickSpecs HP 10500 Switch Series Overview Multiprotocol Label Switching (MPLS) Layer 2 VPN establishes simple Layer 2 point-to-point VPNs across a provider network using only MPLS Label Distribution Protocol (LDP); requires no routing and therefore decreases complexity, increases performance, and allows VPNs of non-routable protocols; uses no routing information for increased security; supports Circuit Cross Connect (CCC), Static Virtual Circuits (SVCs), Martini draft, and Kompella-draft technologies Vir
QuickSpecs HP 10500 Switch Series Overview Web-based authentication provides a browser-based environment, similar to IEEE 802.1X, to authenticate clients that do not support the IEEE 802.
QuickSpecs HP 10500 Switch Series Overview Supports up to 1,024 access points per module; can be used with select HP access points (refer to the HP 10500/7500 20G Unified Wired-WLAN Module data sheet for more details); provides N+1, N+N, and 1+1 redundancy with sub-second failovers; offers IPv4/IPv6 and end-to-end QoS; and includes flexible forwarding modes as well as Wi-Fi clear connect radio-frequency optimization and integrated IDS VPN 20Gbps 10500 Firewall Module provides enhanced stateful packet insp
QuickSpecs HP 10500 Switch Series Configuration Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
QuickSpecs HP 10500 Switch Series Configuration HP 10508 Switch Chassis Must select min 1 Interface Module Must select min 4 Fabric Modules Must select min 1 Management Module Must select min 1 Power Supply 14U - Height JC612A See Configuration Note:1, 2 HP 10508-V Switch Chassis Must select min 1 Interface Module Must select min 4 Fabric Modules Must select min 1 Management Module Must select min 1 Power Supply 20U - Height JC611A HP 10512 Switch Chassis Must select min 1 Interface Module Must select
QuickSpecs HP 10500 Switch Series Configuration PDU Cable ROW C19 PDU Jumper Cord (ROW) JC610A#B2C High Volt Switch to Wall Power Cord NEMA L6-20P Cord (NA/MEX/JP/TW) JC610A#B2E HP 10500 2400W DC Power Supply JC747A See Configuration Note:1, 6 Configuration Rules: Note 1 If more than 1 power supply is selected they, must all be the same Sku number. Note 2 Localization required on orders without #B2B, #B2C or #B2E options. Note 3 #B2E is Offered only in NA, Mexico, Taiwan and Japan.
QuickSpecs HP 10500 Switch Series Configuration HP 10500 4-port 10GbE XFP EA Module min=0 \ max=4 XFP Transceivers JC624A See Configuration Note:4 HP 10500 4-port 10GbE XFP EB Module min=0 \ max=4 XFP Transceivers JC627A See Configuration Note:4 HP 10500 8-port 10GbE SFP+ EB Module min=0 \ max=8 SFP+ Transceivers JC629A See Configuration Note:1, 3 HP 10500 8-port 10GbE SFP+ EA Module min=0 \ max=8 SFP+ Transceivers JC630A See Configuration Note:1, 3 HP 10500 8-port 10GbE SFP+ SE Module min=0 \ max
QuickSpecs HP 10500 Switch Series Configuration HP 10500 24p 1/10GBASE-T SF Mod No Transceivers JG394A HP 10500 48-port Gig-T EA Module No Transceivers JC623A HP 10500 48-port Gig-T SE Module No Transceivers JC618A HP 7500 Advanced VPN Firewall Module min=0 \ max=2 SFP Transceivers JD249A See Configuration Note:6,8,9 HP 10500/11900/7500 20Gbps VPN FW Module min=0 \ max=2 SFP Transceivers JG372A See Configuration Note:6,8 HP 7500 Load Balancing Module No supported Transceivers JD252A See Configu
QuickSpecs HP 10500 Switch Series Configuration HP 10500 8p 40GbE QSFP+ SF Module min=0 \ max=8 QSFP+ Transceivers JG392A See Configuration Note:5 HP 10500 4p 40GbE CFP SF Module min=0 \ max=4 CFP Transceivers JG396A See Configuration Note:7 HP 10500/7500 20G Unified Wired-WLAN Mod No supported Transceivers JG639A See Configuration Note:6,11 Configuration Rules: Note 1 The following Transceivers install into this Module: (Use #0D1 if switch is CTO) - if applicable HP X170 1G SFP LC LH70 1550 Transc
QuickSpecs HP 10500 Switch Series Configuration HP X240 10G SFP+ to SFP+ 1.
QuickSpecs HP 10500 Switch Series Configuration Fabric Modules System (std 0 // max 4) User Selection (min 4 // max 4) per enclosure HP 10504 400Gbps Type A Fabric Module JC615A See Configuration Note:1, 4 HP 10508/10508-V 720Gbps Type A Fabric Module JC616A See Configuration Note:2, 4 HP 10504 880Gbps Type B Fabric Module No supported Transceivers JC751A See Configuration Note:1, 4 HP 10508/10508-V 1.
QuickSpecs HP 10500 Switch Series Configuration Note 3 These Modules install to the following switches: (Use #0D1 if switch is CTO) - if applicable HP 10512 Switch Chassis JC748A Note 4 If more than 1 Fabric Module is selected, they must be of the same Type.
QuickSpecs HP 10500 Switch Series Configuration HP X115 100M SFP LC FX Transceiver HP X110 100M SFP LC LX Transceiver HP X110 100M SFP LC BX 10-U Transceiver HP X110 100M SFP LC BX 10-D Transceiver HP X120 1G SFP RJ45 T Transceiver HP X120 1G SFP LC BX 10-U Transceiver HP X120 1G SFP LC BX 10-D Transceiver HP X120 1G SFP LC LH100 Transceiver HP X120 1G SFP LC LH40 1550nm XCVR HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X125 1G SFP LC LH40 1310nm XCVR HP X125 1G SFP LC LH70 Transce
QuickSpecs HP 10500 Switch Series Configuration HP X180 10G XFP LC LH 80km 1539.77nm DWDM Transceiver HP X180 10G XFP LC LH 80km 1538.
QuickSpecs HP 10500 Switch Series Configuration HP Unified Wired-WLAN 128 AP Redundant E-LTU JG902AAE See Configuration Note:1 Configuration Rules: Note 1 Only applies to JG639A and JG645A.
QuickSpecs HP 10500 Switch Series Configuration HP 10500 -48V 3m DC Power Supply Cable HP 10500 -48V 15m DC Power Supply Cable DA - 14167 EMEA — Version 23 — March 31, 2014 JG390A#B01 JG391A#B01 Page 23
QuickSpecs HP 10500 Switch Series Technical Specifications HP 10504 Switch Chassis (JC613A) I/O ports and slots 4 I/O module slots Supports a maximum of 192 10GbE ports or 96 1/10GBASE-T ports or 192 Gigabit Ethernet ports or 32 40GbE ports, or a combination Additional ports and slots 2 MPU (for management modules) slots 4 switch fabric slots Power supplies 4 power supply slots 1 minimum power supply required (ordered separately) Fan tray includes: 1 x JC632A 1 fan tray slot Physical characteristics Dime
QuickSpecs HP 10500 Switch Series Technical Specifications Immunity Management Notes Services Generic Directive 2004/108/EC EN EN 55024:1998+ A1:2001 + A2:2003; ETSI EN 300 386 V1.3.
QuickSpecs HP 10500 Switch Series Technical Specifications HP 10508 Switch Chassis (JC612A) I/O ports and slots 8 I/O module slots Supports a maximum of 384 10GbE ports or 192 1/10GBASE-T ports or 384 Gigabit Ethernet ports or 64 40GbE ports, or a combination Additional ports and slots 2 MPU (for management modules) slots 4 switch fabric slots Power supplies 6 power supply slots 1 minimum power supply required (ordered separately) Fan tray includes: 1 x JC633A 1 fan tray slot Physical characteristics Dim
QuickSpecs HP 10500 Switch Series Technical Specifications Management Notes Services ESD EN 61000-4-2 Radiated EN 61000-4-3 EFT/Burst EN 61000-4-4 Surge EN 61000-4-5 Conducted EN 61000-4-6 Power frequency magnetic field IEC 61000-4-8 Voltage dips and interruptions EN 61000-4-11 Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 IMC - Intelligent Management Center; command-line interface; out-of-band management (serial RS-232C); SNMP Manager; Telnet; terminal int
QuickSpecs HP 10500 Switch Series Technical Specifications I/O ports and slots 8 I/O module slots Supports a maximum of 384 10GbE ports or 192 1/10GBASE-T ports or 384 Gigabit Ethernet ports or 64 40GbE ports, or a combination Additional ports and slots 2 MPU (for management modules) slots 4 switch fabric slots Power supplies 6 power supply slots 1 minimum power supply required (ordered separately) Fan tray includes: 1 x JC634A 1 fan tray slot Physical characteristics Dimensions 17.32(w) x 25.98(d) x 34.
QuickSpecs HP 10500 Switch Series Technical Specifications Management Notes Services Radiated EN 61000-4-3 EFT/Burst EN 61000-4-4 Surge EN 61000-4-5 Conducted EN 61000-4-6 Power frequency magnetic field IEC 61000-4-8 Voltage dips and interruptions EN 61000-4-11 Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 IMC - Intelligent Management Center; command-line interface; out-of-band management (serial RS-232C); SNMP Manager; Telnet; terminal interface (serial RS-2
QuickSpecs HP 10500 Switch Series Technical Specifications I/O ports and slots 12 I/O module slots Supports a maximum of 576 10GbE ports or 288 1/10GBASE-T ports or 576 Gigabit Ethernet ports or 96 40GbE ports, or a combination Additional ports and slots 2 MPU (for management modules) slots 4 switch fabric slots Power supplies 6 power supply slots 1 minimum power supply required (ordered separately) Fan tray includes: 1 x JC758A, JC773A 2 fan tray slots Physical characteristics Dimensions 17.32(w) x 25.
QuickSpecs HP 10500 Switch Series Technical Specifications Management Notes Services Standards and protocols (applies to all products in series) Radiated EN 61000-4-3 EFT/Burst EN 61000-4-4 Surge EN 61000-4-5 Conducted EN 61000-4-6 Power frequency magnetic field IEC 61000-4-8 Voltage dips and interruptions EN 61000-4-11 Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 IMC - Intelligent Management Center; command-line interface; out-of-band management (serial RS
QuickSpecs HP 10500 Switch Series Technical Specifications Denial of service protection RFC 2267 Network Ingress Filtering Automatic filtering of well-known denial-of-service packets CPU DoS Protection Rate Limiting by ACLs Device management RFC 1157 SNMPv1/v2c RFC 1305 NTPv3 RFC 1902 (SNMPv2) RFC 2271 FrameWork RFC 2579 (SMIv2 Text Conventions) RFC 2580 (SMIv2 Conformance) RFC 2819 (RMON groups Alarm, Event, History and Statistics only) HTTP, SSHv1, and Telnet Multiple Configuration Files Multiple Softwa
QuickSpecs HP 10500 Switch Series Technical Specifications Ethernet over MPLS Networks RFC 903 RARP RFC 4664 Framework for Layer 2 Virtual Private RFC 906 TFTP Bootstrap Networks RFC 925 Multi-LAN Address Resolution RFC 4665 Service Requirements for Layer 2 RFC 950 Internet Standard Subnetting Procedure Provider Provisioned Virtual Private Networks RFC 959 File Transfer Protocol (FTP) RFC 4761 Virtual Private LAN Service (VPLS) Using RFC 1027 Proxy ARP RFC 1035 Domain Implementation and Specification BGP
QuickSpecs HP 10500 Switch Series Technical Specifications RFC 3719 Recommendations for Interoperable Networks using Intermediate System to Intermediate System (IS-IS) RFC 3784 ISIS TE support RFC 3786 Extending the Number of IS-IS LSP Fragments Beyond the 256 Limit RFC 3787 Recommendations for Interoperable IP Networks using Intermediate System to Intermediate System (IS-IS) RFC 3847 Restart signaling for IS-IS RFC 4251 The Secure Shell (SSH) Protocol Architecture RFC 4486 Subcodes for BGP Cease Notifica
QuickSpecs HP 10500 Switch Series Technical Specifications RFC 2080 RIPng for IPv6 RFC 2081 RIPng Protocol Applicability Statement RFC 2292 Advanced Sockets API for IPv6 RFC 2373 IPv6 Addressing Architecture RFC 2375 IPv6 Multicast Address Assignments RFC 2460 IPv6 Specification RFC 2461 IPv6 Neighbor Discovery RFC 2462 IPv6 Stateless Address Auto-configuration RFC 2463 ICMPv6 RFC 2464 Transmission of IPv6 over Ethernet Networks RFC 2473 Generic Packet Tunneling in IPv6 RFC 2526 Reserved IPv6 Subnet Anyca
QuickSpecs HP 10500 Switch Series Accessories HP 10500 Switch Series accessories Modules HP 10500 Type A Main Processing Unit with Comware v7 Operating System HP 10500 Main Processing Unit HP 10500 48-port 10GbE SFP+ SF Module HP 10500 32-port 10GbE SFP+ SF Module NEW HP 10500 24-port 1/10GBASE-T SF Module HP 10500 8-port 40GbE QSFP+ SF Module HP 10500 4-port 40GbE QSFP+ SF Module HP 10500 4-port 40GbE CFP SF Module HP 10500 8-port 10GbE SFP+ SE Module HP 10500 4-port 10GbE XFP SE Module HP 10500 16-port
QuickSpecs HP 10500 Switch Series Accessories HP X170 1G SFP LC LH70 1530 Transceiver HP X170 1G SFP LC LH70 1550 Transceiver HP X170 1G SFP LC LH70 1570 Transceiver HP X170 1G SFP LC LH70 1590 Transceiver HP X170 1G SFP LC LH70 1610 Transceiver HP X130 10G SFP+ LC SR Transceiver HP X130 10G SFP+ LC LRM Transceiver HP X130 10G SFP+ LC LR Transceiver HP X130 10G SFP+ LC ER 40km Transceiver HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 1.
QuickSpecs HP 10500 Switch Series Accessories License HP 10500/7500 SSL VPN 1000-user License HP 10500/7500 SSL VPN 5000-user License HP Unified Wired-WLAN 128 AP E-LTU WLAN HP 10500/7500 20G Unified Wired-WLAN Module Power cords HP 10500 -48V 3m DC Power Supply Cable HP 10500 -48V 15m DC Power Supply Cable Appliance HP 10500/7500 Advanced VPN Firewall Module HP 10500/7500 SSL VPN Module with 500-user License HP 10500/7500 NetStream Monitoring Module HP 10500/11900/7500 20Gbps VPN Firewall Module HP 10504
QuickSpecs HP 10500 Switch Series Accessory Product Details NOTE: Details are not available for all accessories. The following specifications were available at the time of publication. Transceivers HP X125 1G SFP LC LH40 1310nm Transceiver (JD061A) Ports Connectivity 1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics) Connector type LC Wavelength 1310 nm Physical characteristics Dimensions 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.
QuickSpecs HP 10500 Switch Series Accessory Product Details HP X125 1G SFP LC LH70 Transceiver (JD063B) A small form-factor pluggable (SFP) Gigabit LH70 transceiver that provides a full-duplex Gigabit solution up to 70km on a single-mode fiber. Ports 1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics) Connectivity Connector type LC Wavelength 1550 nm Physical characteristics 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm) Full configuration weight 0.04 lb. (0.
QuickSpecs HP 10500 Switch Series Accessory Product Details HP X120 1G SFP LC BX 10- Ports U Transceiver (JD098B) Connectivity A small form-factor Physical characteristics pluggable (SFP) Gigabit LXBX10-U transceiver that provides a full duplex Gigabit solution up to Electrical characteristics 10km on a single mode cable. Cabling Services Services 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm) Full configuration weight 0.04 lb. (0.02 kg) Power consumption typical 0.
QuickSpecs HP 10500 Switch Series Accessory Product Details HP X120 1G SFP LC LH100 Ports Transceiver (JD103A) Connectivity 1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics) Connector type LC A small form factor pluggable (SFP) Gigabit LH100 transceiver that provides a full-duplex Gigabit solution up to 100km on a single mode fiber. Wavelength 1550 nm Electrical characteristics Power consumption typical 0.8 W Power consumption maximum 1.
QuickSpecs HP 10500 Switch Series Accessory Product Details HP X120 1G SFP LC LX Transceiver (JD119B) Ports 1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX) Connectivity Connector type LC Wavelength 1300 nm A small form-factor pluggable (SFP) Gigabig LX Physical characteristics transceiver that provides a full duplex Gigabit solution up to 550m on MMF or Electrical characteristics 10Km on SMF Cabling Dimensions 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.