Datasheet

QuickSpecs
HP 3PAR StoreServ 7000 Storage
Standard Features - StoreServ File Controller
c04164476 — DA – 14433 Worldwide — Version 31 — December 01, 2014
Page 50
5
PCIe 3.0
X8
X8
20
Half Length,
Full Height
Slot
Proc 2
6
PCIe 3.0
X4
X8
23
Half Length,
Full Height
Slot
Proc 2
* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
** Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed.
NOTE: All slots support up to 150w PCIe cards, but an additional Power Cord Option is required (669777-B21). See Option Section
below for offering
Storage Controller
NOTE: HP 3PAR StoreServ File Controller includes a storage controller designed for internal drives
housing the O/S mirror only; an HBA is required to address connectivity to the 3PAR StoreServ Storage
array.
Controller(s)
HP Smart Array P420i/1GB with FBWC
RAID
Needed for internal drive mirror only
Storage
Hard Drives
Internal
Eight 2.5" (Small Form Factor) hot-plug bays
 2 x 300GB 6G SAS 10K SFF HDDs for OS
mirror (3PAR File Controller v2)
 2 x 450GB 6G SAS 10K SFF HDDs for OS
mirror (3PAR File Controller)
External
3PAR StoreServ Storage using Fibre Channel
Power Supply
2 x 460 Watts Platinum
Power Cords
NOTE: The HP 3PAR StoreServ File Controller is primarily connected to PDU's in data center racks so
they now ship standard with only a PDU 6-foot C-14 to C13 power cord (142258-001). If a user wishes
to power a system using a110V receptacle see Power Cord option section for more options.
System Fans
(4) (N+1 redundancy standard)
Form Factor
2U Rack form factor
Host Bus Adapter (HBA)
Support
HP 3PAR StoreServ File Controller is designed to be connected to a HP 3PAR StoreServ Storage array
by adding a recommended Fibre Channel HBA.