Installation Manual
ManualsBrandsHestan ManualsBuilt-In Dishwashers24 Inch Fully Integrated Built-In Dishwasher with 13 Place Settings, 10 Wash Cycles, Full-Sized 3rd Rack, 42 dBA Quiet Operation, Double Axial Washing System™, AquaLeak Detection Technology™, Marquise Accented™ Handle, Auto Door-Open Drying, Interior Ligh
Table Of Contents
- PRÉCAUTIONS DE SÉCURITÉ - AVANT DE COMMENCER
- NUMÉROS DE MODÈLE
- PLAQUE SIGNALÉTIQUE
- RESPECT DE LA RÉGLEMENTATION ET DES CODES EN VIGUEUR
- AVERTISSEMENTS SUR LES PRODUITS / SECURITE
- EMPLACEMENT ET PREPARATION
- INSTALLATION
- PRÉPARATION DES PANNEAUX DÉCORATIFS
- ÉTAPES FINALES
- SERVICE
- SAFETY PRECAUTIONS - BEFORE YOU BEGIN
- MODEL NUMBERS
- RATING LABEL
- REGULATORY / CODE REQUIREMENTS
- PRODUCT WARNINGS / SAFETY
- LOCATION AND PREPARATION
- INSTALLATION
- OVERLAY PANEL
- FINAL STEPS
- SERVICE
LOCATION AND PREPARATION
(CONT.)
PREPARATIONPREPARATION
Before moving the dishwasher, protect any finished flooring and secure the door closed to
prevent damage. DO NOT lift the dishwasher by the door handle.
Make sure that power can be provided to the location selected.
TOOLSTOOLS
The following tools are needed for the installation of the dishwasher:
• Tape measure and straight edge or ruler
• Pencil
• Philips screwdriver
• T20 Torx driver
• Level
• Plumbing pliers
• Drill and drill bits
• Safety gloves and goggles
STEPS FOR INSTALLATIONSTEPS FOR INSTALLATION
The following pages provide the necessary information for proper installation of the dishwasher
and are arranged as follows:
• Contents of installation kit
• Installation cutout dimensions and required clearances
• Electrical, water, and drain connections.
• Preparation and installation of overlay panels (-OV units only)
• Final installation
• Leak inspection and testing.
2021 Hestan Commercial Corporation
5
EN