Installation Manual

DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT

CONNECTIONS IN ORDER TO AVOID THE POSSIBILITY OF

OVERHEATING OR BURNING, WITH CONSEQUENT FIRE

HAZARD.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE

TO PERSONS, ANIMALS OR PROPERTY RESULTING FROM FAILURE

TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH

EVEN A SINGLE COMPONENT OF THE APPLIANCE, OR FROM THE

USE OF NON-ORIGINAL SPARE PARTS.

IF IN DOUBT ABOUT THE CONTENTS OF THIS MANUAL, CONTACT HESTAN CUSTOMER

CARE.

LOCATION AND PREPARATION

UNPACKING AND PLACEMENTUNPACKING AND PLACEMENT

Remove the outer carton and packing materials, but do not remove the plastic film covering

the stainless-steel surfaces. This film protects the finish from scratches until the appliance is

installed in its final position.

Materials packaged with the dishwasher include this manual, the Use and Care Manual, and the

installation kit.

• The kit may include supplemental instructions for assembly.

OVERLAY MODELSOVERLAY MODELS

Dishwashers configured for overlay doors (rather than color or stainless steel finish) will include

a full-size template for the door overlay panel, as well as hardware and fasteners for the overlay.

The template includes pictoral instructions for preparing and installing the overlay panel.

HANDLINGHANDLING

The unit is heavy and should be handled with care. Use proper safety equipment, such as gloves

and 2 persons to move the appliance into position to avoid injury and to avoid damage to the

fioor or the appliance itself.

DO NOT USE A HAND TRUCK OR DOLLY ON THE FRONT OR REAR

OF THE DISHWASHER. HANDLE AND MOVE FROM THE SIDES ONLY.

Do not lift or carry the appliance by the door or handle. This could damage

the door hinges.

PRODUCT WARNINGS / SAFETY

(CONT.)