Installation Manual

FINAL STEPS

(CONT.)

GASKETS GASKETS

Before securing the dishwasher to the cabinets, attach the gaskets to the sides.

1. Remove the adhesive band from the gasket (see Figure 1).

2. Fix the gasket to the dishwasher, inserting it in the seat on the

sides towards the front (see Figure 2).

- Make sure that the long side of the gasket, the one with the

holes for inserting the screws, is attached to the outside of

the dishwasher.

- The hole in the long side must match the holes in the

dishwasher. (see A in Figure 3)

3. Make sure the gasket adheres perfectly to the dishwasher. Figure 4 shows the state of the

dishwasher after operations 1-3 are done.

MAKE SURE THERE IS AT LEAST 1/8" [3 mm] CLEARANCE BETWEEN

THE TOP OF THE DOOR AND THE SURFACE ABOVE IT.

4. Secure the dishwasher to the adjacent cabinetry or to the countertop above using the

supplied screws (item A). This operation secures the dishwasher to the adjacent cabinets or

to the countertop.

5. Cover the side holes

using the supplied plugs

(item B).

Figure 1

Figure 2



Figure 3

Figure 4