Owner Manual

©2019 Hestan Commercial Corporation
14
EN
INSTALLATION (continued)
34.6”
[87.9]
NON-COMBUSTIBLE
CONSTRUCTION
ISLAND VENT
OPENINGS
W
DUCT
OUTLETS
NOTES:
* SHADED AREA INDICATES WHERE COMBUSTIBLE MATERIALS ARE NOT ALLOWED.
* "W" IS THE WIDTH OF THE GRILL.
NON-COMBUSTIBLE CONSTRUCTION ONLY
(HESTAN GRILL SHOWN)
18”
[45.7]
27.4”
[69.7]
18.3”
[46.5]
30”
[76.2]
REF.
5”
[12.3]
MIN.
12”
[30.5]
12”
[30.5]
6”
[15.1]
6”
[15.1]
30”
[76.2]
36”
[91.4]
REF.
GRILL
WIDTH
RECOMMENDED
VENT HOOD
30" [76.2]
GVP42
36" [91.4]
GVP48
42" [106.7]
GVP54
Fig. 1
12”
[30.5]
SUPPLEMENTARY VENTILATION
In certain installations, such as an island located against your home or other structure, or perhaps
a short roof overhang above your grill, a “range-hood” style ventilation unit may be desirable to
direct smoke and grease away from those structures. In these cases, a Hestan Pro Canopy vent
hood is recommended. See table in the image below to select the appropriate vent hood for your
grill model.
FOR NON-COMBUSTIBLE LOCATIONS ONLY!! The vent hood is wall-mounted and must
NOT be installed on or next to unprotected combustible construction. A minimum clearance to
vertical combustible material, such as adjacent walls, is 12” [30 cm] on the sides of the appliance
(see below). Complete installation details are provided with the hood. Duct covers are also
available to conceal the ductwork and wiring above the vent.