Installation Instructions
7
hestanoutdoor.com
HESTAN RESIDENTIAL INSTALLATION MANUAL
5). Check interior door openings to make sure the unit is 
level  and  square.  Install  shelving  and/or  drawers.  Place 
the  slide  brackets  squarely  into  the  bracket  grooves. 
When installed properly, a “click” should be heard from the 
slide bracket retaining tabs and the brackets should slide 
smoothly.  The  retaining  tabs  will  stop  the  shelf/drawer 
when pulled out to full extension.
6).  Turn  on  the  power  to  the  wall  outlet  at  the  circuit 
breaker.
NOTE:  Improper  shelf/drawer  installation  may  not  actuate 
slide mechanism.
Measure front of opening
from floor surface to bottom
edge of countertop
Measure at both rear corners of
unit from floor surface to bottom
of countertop
TOE PLATE INSTALLATION
Once the unit is secured in place, install the louvered toe 
plate. Secure the plate by snapping the latch into the latch 
catch on the unit (Figure 3).
The toe plate must be removed to 
interfere  with  removal,  and  the  louvered  sections 
must not be co
vered or obstructed. Obstructions could 
prevent proper air circulation, which may damage the 
unit.
NOTE:  To  achieve  maximum  performance,  interior  louver 
openings and fan guard openings should never be obstructed.   
CAUTION
Latch
Strike
Latch
Figure 2. Leveling the Unit
Figure 3. Toe Plate Installation
service the unit. The floor cannot










