Installation and Instruction Manual

EN
©2021 Hestan Commercial Corporation
14
MAINTENANCE
This ice machine must be maintained in accordance with the instruction manual and labels provided
with the ice machine. Consult with your local Hestan Certified Service Representative about
maintenance service.
• Only qualified service technicians should service this ice machine.
• Failure to install, operate, and maintain the ice machine in accordance with this manual will
adversely affect safety, performance, component life, and warranty coverage.
• Move the control switch to the “OFF” position and unplug the ice machine from the electrical
outlet before servicing.
• To reduce the risk of electric shock, do not touch the control switch or plug with damp hands.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place
after any maintenance is performed. Make sure that none have fallen into the ice storage bin.
• After service, make sure that there are no wires pinched between the panels and ice machine.
Make sure you do not damage or pinch the water supply line, drain line, or power cord.
MAINTENANCE SCHEDULEMAINTENANCE SCHEDULE
The maintenance schedule below is a guideline. More frequent maintenance may be required
depending on water quality, the ice machine’s environment, and local sanitation regulations.
FREQUENCY AREA TASK
Weekly Scoop Clean the scoop using a neutral cleaner. Rinse thoroughly after
cleaning
Monthly External Water
Filters
Check for proper pressure and change if necessary.
Ice Machine
Exterior
Wipe down with clean, soft cloth. Use a damp cloth containing
a neutral cleaner to wipe off oil or dirt build up. Clean any
chlorine staining (rust colored spots) using a non-abrasive
cleaner like Zud or Bon Ami.
Every 3
Months
Ice Storage Bin
Drain
Maintain as outlined on page 18 “Storage Bin Drain”
Yearly Ice Machine and
Ice Storage Bin
Clean and sanitize per the cleaning and sanitizing instructions
provided in this manual. See page 14 “Cleaning and Sanitizing
Instructions”.
Optional Drain
Pump (AGDP)
Test as outlined on page 19 “Optional Drain Pump AGDP”.
Water Supply
Inlet
Close the ice machine water supply line shut-off valve and
drain the water system. Clean the water supply inlet screen.
Condenser Inspect. Clean if necessary. See page 19 “Condenser”.
Water Hoses Inspect the water hoses and clean/replace if necessary.
CLEANING AND SANITIZING INSTRUCTIONSCLEANING AND SANITIZING INSTRUCTIONS
This ice machine must be cleaned and sanitized at least once a year. More frequent cleaning and
sanitizing may be required in some water conditions.
• To prevent injury to individuals and damage to the ice machine, do not use ammonia type
cleaners.
• Carefully follow any instructions provided with the bottles of cleaning and sanitizing solution.
• Always wear liquid-proof gloves and goggles to prevent the cleaning and sanitizing solutions
from coming into contact with skin or eyes.
• After cleaning and sanitizing, be careful not to leave any solution in the ice machine.