Quick Start Guide

CHANGING REGULATORS

(continued)

REGULATOR TYPES

Shown below are the two types of regulators used on Hestan outdoor appliances. Your conversion kit

(AGBCK-NG or AGBCK-LP) comes with the appropriate regulator for the fuel type you are converting to.

Remove your existing regulator by using a pipe wrench and other tools as required. Consult the GAS

CONNECTIONS section of your Hestan outdoor appliance for full instructions on installing the new

regulator, and providing accessible upstream gas shutoff valve (NG only). Use thread sealant on all

connections.

ADAPTER, 3/8 FLARE

X 1/2 NPT FEMALE

(P/N 008053)

2-STAGE LP

REGULATOR /

HOSE ASSEMBLY

(P/N 014309)

NAT GAS

REGULATOR

(P/N 006239)

TESTING & ADJUSTMENT

LEAK TESTING

GENERAL

A complete gas tightness check must be performed of all gas-carrying components due to possible

movement during installation, or excessive pressure unknowingly being applied to parts of the unit.

BEFORE TESTING

• Do not smoke while leak testing.

• Never leak test with an open flame.

• Make a soap solution of one part liquid detergent and one part water for leak testing purposes.

• Apply the solution to the gas fittings by using a spray bottle or a brush.

• For LP units, always check with a full LP cylinder.