Quick Start Guide

1. Remove the grate cover, grate, burner cap(s), and drip tray from the side burner. Remove the control

knob(s) and the 4 Phillips head screws securing the control panel to the side burner. Carefully tilt

down the control panel and pull off the connectors to the light switch. Remove the control panel

and set aside.

CHANGING ORIFICES

2. Reach inside the burner to hold up the orifice holder against the burner bowl (to prevent it from

falling) and remove the 2 Phillips head screws securing the burner base. Continue to hold the orifice

holder against the burner bowl and reinstall the 2 Phillips head screws back onto the orifice holder so

it doesn’t fall.