Product Manual

Overow Tube Assembly
Place the rubber washer on the
bottom tray aligned with the
drain hole.
Push the plastic drain piece
through the rubber washer and
out the drain hole.
Screw the overow tube into the
plastic drain piece.
Tighten to the unit with the
plastic nut from the bottom of
the unit.
Check for water leakage.
1.
2.
3.
4.
5.
Electrical Connection
All electrical
connections
must comply with federal and
local safety regulations and be
performed by a quialied
professional technician.
Conrm before initial startup.
Cabinet is level.
Blower spins freely.
Electrical specications meet the
amperage of the unit.
Water supply is stable and no
leaks.
1.
2.
3.
4.
Connect the unit to a 110-120~ +/-
10% 60Hz current (wiring diagram,
page 9). The power supply for the
cooler should connected directly to
the main switch box. Make sure that
the power switcher are in the o
position before operating your cooler.
damaged, it must be replaced by a
qualied person in order to avoid a
hazard.
If the power
supply cord is
Operating Instructions & Parts Manual
R
4