Use and Care Manual

Features
MC26A Control Panel
Swing Button - Press to operate oscillation
motor to swing the air left to right.
Timer Button Lit when engaged - Press to
select the desired timer selection, cooler will
stop running all features when selected time
expires.
Pump Button - Pump will function continually
when this light is lit.
*
Press and hold the pump button for 2 seconds
to set the humidity. The setting range is from
50% to 90% RH. Each press increase 5% RH.
Once the desired RH is adjusted, the value will
fla
sh 5 seconds. The setting is automatically
activated after 5 seconds.
Fan Button - Fan ON/OFF
Power Button – If Green light, all functions will
be able to operate. Red light, all control
functions will be off.
Main power control. When the power is turned
to the “OFF” position, the other controls will not
work.
Remote control (For MC26A Only)
The remote-control functions:
1) Power
2) Fan speed
3) Swing
4) Pump
5) Timer
To replace the battery, slide the back panel of
the remote-c
ontrol down to release it. Remove
old battery and replace with CR 2025 round
battery.
MC26L Control Panel
Switch for Fan
Has 4 positions. (Clockwise from OFF)
OFF, LOW, MED, HI.
Switch for Pump - Controls the pump
Switch for Swing - Controls the fan oscillation