User Manual

Safety
Key Operational Points
Your cooler must be positioned in front of an
open window or door if it is to operate effectively.
(see below picture)
1. Always ensure that there is another open
window or door through which the air can
exhaust from the room.
2. Ensure the rigid media is kept clean
throughout the use of your cooler.
3. At the end of each day run your cooler on
FAN ONLY for 30 minutes to dry out the
rigid media.
4. Prior to putting your cooler away for
winter, always:
a. Drain the tank and wipe clean.
b. Clean the rigid media.
c. Reassemble and run on FAN
ONLY for 30 minutes to dry out the rigid
media.
Indoor Use
Safety Rules
1. Read and follow all instructions, cautions,
and warnings. Failure to do so could result in
personal injury, death or property damage.
2. Unit must be in the OFF position and
UNPLUGGED from power receptacle before
performing any maintenance.
3. Make sure the electrical power source
conforms to the requirement of the evaporative
cooler(s) as well as local codes.
4. To reduce the risk of fire or electrical shock,
do not expose electrical connections to water.
5. Do not touch electrically live components.
6. Assure that all power cords do not meet any
sharp edges, hot surfaces or chemicals.
Immediately replace any damaged parts.
CAUTION: BEFORE CLEANING OR SERVICING DISCONNECT POWER SUPPLY