User Manual

26  27
39 SIG-FC
Bottom Bar Display
Foreground Color (Text)
Select Color
BLACK, WHITE, RED, BLUE, GREEN, YELLOW,
INDIGO, PURPLE, GRAY
40 SIG-BC
Bottom Bar Display
Background Color
Select Color
BLACK, WHITE, RED, BLUE, GREEN, YELLOW,
INDIGO, PURPLE, GRAY
41 RX-FC
Main LCD Receiving Color
Foreground Color (Text)
Select Color
BLACK, WHITE, RED, BLUE, GREEN, YELLOW,
INDIGO, PURPLE, GRAY
42 TX-FC
Main LCD TX Color
Foreground Color (Text)
Select Color
BLACK, WHITE, RED, BLUE, GREEN, YELLOW,
INDIGO, PURPLE, GRAY
43 TXDISP Transmit Display
POWER Display Power Level on Bottom Graph
MIC-V Display Mic Audio Level on Bottom Graph
44 MEM-CH Memorize Channel 000 > 199 Indicates channel number to be stored.
45 DEL-CH Delete Channel 000 > 199 Indicates channel number to be deleted.
46 SFT-D Frequency Shift Direction
OFF No O󰀨set (simplex)
+ Plus frequency shift
- Minus frequency shift
47 OFFSET
Frequency Shift O󰀨set
Amount
00.00 > 69.99 Frequency shift in MHz
48 ANI ANI ID Code Can only be set with software
49 ANI-L ANI Length 3, 4, 5 Length of ANI ID code
50 REP-S Repeater Activation Tone
1000Hz, 1450Hz, 1750Hz,
2100Hz
Audible tone for repeater activation
51 REP-M Repeater Forwarding Mode
OFF Function OFF
CARRI Forward after receiving Carrier
CTDCS Forward after receiving correct CTDCS
TONE
Forward after receiving correct mono audio
(Menu 42)
DTMF
Forward after receiving assigned DTMF code
(ANI)
52 TMR-MR
TMR - Return Time Delay
to Primary Channel; Sets
the PTT to the last received
transmission channel. Time
delay selectable
OFF
Function OFF - Transmits always on Primary
Channel
1 > 50 seconds
This is the delay time before returning to the
primary channel after secondary signal is clear.
53 STE
Squelch Tail Elimination,
Requires both radios have
function ON.
OFF Function OFF
ON Eliminates squelch tail at end of transmission.
54 RP-STE
Repeater Squelch Tail
Elimination,
Requires a repeater using
this function.
OFF Function OFF
1 > 10 Delay Time
55 RPT-DL Repeater squelch tail delay.
OFF Function OFF
1 > 10 Delay Time
56 DTMF-G DTMF Gain/Audio Level 0 > 60 0 = Lowest Audio Gain; 60 = Highest Gain
57 RESET Initialize to Factory Defaults
VFO Menu Initialization
ALL Menu and Channel Initialization