User's Manual
Table Of Contents
- 1 Introduction
- 2 Setup
- 3 Data Structure
- 4 Web Control
- 5 PandarView
- 6 Communication Protocol
- 7 Sensor Maintenance
- 8 Troubleshooting
- Appendix I Channel Distribution
- Appendix II Absolute Time and Laser Firing Time
- Appendix III PTP Protocol
- Appendix IV Phoenix Contact
- Appendix V Nonlinear Reflectivity Mapping
- Appendix VI Certification Info
- Appendix VII Support and Contact
28
4.3 Azimuth FOV
For Azimuth FOV Setting, users can select one of the three modes.
Figure 4.4 Azimuth FOV Page of Web Control
4.3.1 For all channels
A continuous angle range, specified by a start angle and an end angle, will be applied to all the channels.
Outside the specified angle range, there will be no laser firing or data generated.
NOTE Click “Save” to apply your settings.
Figure 4.5 Azimuth FOV for All Channels