User's Manual
Table Of Contents
- 1 Introduction
- 2 Setup
- 3 Data Structure
- 4 Web Control
- 5 PandarView
- 6 Communication Protocol
- 7 Sensor Maintenance
- 8 Troubleshooting
- Appendix I Channel Distribution
- Appendix II Absolute Time and Laser Firing Time
- Appendix III PTP Protocol
- Appendix IV Phoenix Contact
- Appendix V Nonlinear Reflectivity Mapping
- Appendix VI Certification Info
- Appendix VII Support and Contact
9
2.3 Connection Box (Optional)
Users may connect the LiDAR directly or using the connection box.
The connection box comes equipped with a power port, a GPS port, and a standard Ethernet port.
The cable length between the connector and the connection box is 1.7 m by default.
Lemo part number: PHG.2T.316.CLLC75Z (female, on the connection box)
Figure 2.6 Connection Box