User's Manual
Table Of Contents
- Contents
- Safety Notice
- 1 Introduction
- 2 Setup
- 3 Data Structure
- 4 Web Control
- 5 PandarView
- 6 Communication Protocol
- 7 Sensor Maintenance
- 8 Troubleshooting
- Appendix I Channel Distribution
- Appendix II Absolute Time and Laser Firing Time
- Appendix III PTP Protocol
- Appendix IV Certification Info
- Appendix V Support and Contact
48
7 Sensor Maintenance
■ Storage
Store the device in a dry, well ventilated place. The ambient temperature shall be between -40°C and +105°C, and the humidity below 85%.
Please check the specifications page in this user manual for product IP rating, and avoid any ingress beyond that rating.
■ Transport
Package the device in shock-proof materials to avoid damage during transport.
■ Cleaning
Stains on the device's enclosure, such as dirt, fingerprints, and oil, can negatively affect the point cloud data quality.
Please perform the follow steps to remove the stains.
NOTE
· To avoid damaging the optical coating, DO NOT apply pressure when wiping the enclosure
· Only clean the stained area of the enclosure
· Check before using a lint-free wipe. If the wipe is stained, use another
1) Thoroughly wash your hands or wear a pair of powder-free PVC gloves
2) To remove dust, blow dry air onto the enclosure, or use a piece of lint-free wipe to lightly brush across the dusty area
To remove persistent stains, move on to the next step
(Continued on the next page)