User's Manual
Table Of Contents
- Contents
- Safety Notice
- 1 Introduction
- 2 Setup
- 3 Data Structure
- 4 Web Control
- 5 PandarView
- 6 Communication Protocol
- 7 Sensor Maintenance
- 8 Troubleshooting
- Appendix I Channel Distribution
- Appendix II Absolute Time and Laser Firing Time
- Appendix III PTP Protocol
- Appendix IV Certification Info
- Appendix V Support and Contact
30
4 Web Control
Web control is used for setting parameters, checking device info, and upgrading.
To access web control
1) Connect the LiDAR to your PC using an Ethernet cable
2) Set the IP address according to Section 2.4 (Get Ready to Use)
3) Enter this URL into your web browser: 192.168.1.201/index.html
NOTE Google Chrome or Firefox is recommended.