User's Manual
If laser based angle range method is selected, users can see a table as in Figure 4.4. The start and end angles of each laser can be
configured individually.
Users can edit the start and end angles by first downloading the angle range configuration file and then upload the edited configuration file.
Please click “Save” to apply your settings.
NOTE
1) Use LiDAR Based Method if the same angle range is expected on all 64 channels. Outside the specified range, no laser will be firing and
no data will be generated.
2) If Laser Based Method is chosen and the angle range varies channel by channel, there will be no data generated only outside the union of
all specified angle ranges.
Figure 4.4 Angle Range Page-Laser Based
Laser Based
-26-