User's Manual

Figure III.9 Distance Reference Circle
Figure III.7 View Direction Selection
Figure III.8 Mouse Shortcuts
In Orthogonal Projection view, click on ,
thereafter while holding “Control” on the keyboard, select
a point and hold down the left mouse button in order to create a
spatial distance reference, in units of meters. Click on again to
cancel the distance reference.
3D Projection Mode Switching
Distance Reference Circle
PandarView enables switching between two types of 3D projection
methods (Orthogonal Projection and Perspective Projection)
through the drop-down menu.
Click on to show/hide 12
gray distance reference circles.
The corresponding actual
distances are as shown above.
The lower left axis shows the
current viewing position.
Click “Tools” to open “Grid
Properties”, where you can
change the color and width of
the circles.
Click on to show/hide 12
Mouse Shortcuts
Hold left button Hold scroll
Scroll
01．
02．
03．
Slide scroll wheel to magnify/minimize
Drag while holding left button to adjust view angle
Drag while holding scroll wheel to pan
Up
Down
View Direction Selection
Front POV Top POV
Right POV
Click on the following buttons to view the point cloud data
from different directions.
3 PandarView Features
n Orthogonal Projection view, click on ,
thereafter while holding “Control” on the keyboard, select
a point and hold down the left mouse button in order to create
spatial distance reference, in units of meters. Click on
again to
-36-