Manual

7
Installation Instructions
De vice Of fl ine B ehavior
Device Offline Behavior
 No Change
 Lock
 Unlock
Vo lt age Out of
Ra ng e Limit s
Set Voltage Out of Range Limits
Establishes Out of Range entries in
Log.
 Low Overflow Voltage in Volts
 High Overflow Voltage in Volts
11 to 28 is the normal range.
Ja m Timers
Set Jam Timers
Set time to dictate when a jam
message is sent when the strike is
locked and keeper open.
 Jam Delay Timer in seconds
(0 – 255)
Transmit Co mmand
Va lidat ion
Set Transmit Command
Validation
Sets Locking, Security Locking,
Opening, Holding, Activator
State, and System Voltage
entries to valid or invalid,
determining if the entries are read
or ignored.
NOTE: If it is not possible to set
respective entries, check to see if
they are set to valid.
Hi-O System Settings
Refer to the Hi-O System Manual (A8002) for additional information