Specification Sheet

Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - elettromedia.com
All Specifications Subject to Change Without Notice_22.B
hertz-audio.com
DIGITAL INTERFACE PROCESSOR
S8 DSP
S8 DSP
DIGITAL INTERFACE PROCESSOR
• 6-channel PRE IN (0,8 - 6Vrms)
• 6-channel SPEAKER IN (2,5 - 21Vrms)
(with USS)
• SPDIF coaxial input (up to
24bit/96KHz)
• ART
TM
- Automatic Remote
Turn-On/Off with Speaker-In
• 8-channel / 4Vrms capable RCA
outputs
• 7-band EQ for each input channel
• Input-Output Routing Matrix setup
by Control APP/Software
• Start&Stop Compliance to 6V
• 4 Presets selection by wire
• iOS/Android Control APPs
• Windows/Mac Control Software
All connectors in one side
63
MANUALE D’USO /
10. TECHNICAL SPECIFICATIONS
POWER SUPPLY
Nominal Power supply voltage / fuse: 7 ÷ 20 VDC / 1A
Pulse operating voltage: 5 ÷ 24 VDC
Idling current: 0.34 A
OFF current (ART
TM
= OFF): <80 µA
OFF current (ART
TM
= ON): <80 µA
Remote IN: 6 ÷ 20 VDC (10 mA)
Remote OUT: 4 ÷ 20 VDC (150 mA)
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable): 1.5 ÷ 7 VDC
SIGNAL STAGE
Resolution: 24bit
Sampling Rate 96 KHz
Distortion - THD @ 1 kHz, 1 VRMS Output: 0.004 %
Bandwidth @ -3 dB: 10 Hz ÷ 40 kHz
S/N ratio @ A weighted, 4 V Output, 1 V Master Input: 100 dBA
S/N ratio @ A weighted, 4 V Output, 1 V Digital IN Input: 112 dBA
Channel Separation @ 1 kHz: 97 dBA
Input sensitivity Pre-In: 0.8 ÷ 6 VRMS
Input sensitivity Speaker-In: 2.5 ÷ 21 VRMS
Input Impedance: 38 kΩ (Pre IN/AUX) 4.7 Ω (Speaker IN)
Max output Level 0,1%THD: 4 V
INPUTS STAGE
Analog inputs management Audio input routing matrix type
Low level (Pre In): 6 RCA inputs
Hi-Level: 6 Wired inputs
Digital IN: Coaxial S/PDIF; up to 24bit 96KHz; Extra Gain:+3dB, +6dB.
OUTPUT STAGE
Low level (Pre Out): 8 RCA outputs
Output Equalizer 15 poles Parametric EQ: ±12 dB; 20 ÷20 kHz
Output Signal Limiter Yes (Selectable)
CONNECTION
From / to personal computer: 1 x micro USB
Bluetooth data connectivity (no audio streaming): BT 5.0 (BLE)
CROSSOVER
Filter type: Full / Hi-Pass / Low-Pass / Band Pass
Filter mode and slope: Linkwitz @ 12 / 24 dB
Butterworth @ 6 / 12 /18 / 24 / 30 dB
Bessel @ 6 / 12 /18 / 24 / 30 dB
Crossover frequencies: 20 ÷ 20 k Hz (120 step)
Phase control: 0° / 180°
EQUALIZER (20 HZ ÷ 20 kHz)
Inputs: Parametric EQ: +12 dB ÷ -12 dB; 7 poles (for each input channel)
Outputs: Parametric EQ: +12 dB ÷ -12 dB; 15 poles (for each output channel)
GENERAL
Memory Preset: 4 x Preset
Memory Preset selection: Through the Control Software or by wire
Input Selection: Through the Control Software or by wire
TIME ALIGNMENT
Distance: 0 ÷ 471.5 cm / 0 ÷ 185.5 in.
Delay: 0 ÷ 13.58 ms
Step: 0.02 ms, 0.7 cm / 0.27 in.
GENERAL REQUIREMENTS
PC connections: 1 x USB 1,1 / 2,0 / 3,0 Compatible or Bloutooth 5.0 BLE
Software / PC requirements: Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE)
Windows 11 (USB and BT BLE)
Mac Os: 10.13 Hight Sierra or later (USB and BT BLE)
Minimum mobile device requirements: Android OS 7 or later (USB OTG and BT BLE), iOS 12 or later (BT BLE)
Video Resolution with screen resize min. 1024 x 600
Ambient operating temperature range 0° C to 55° C / (32° F to 131° F)
SIZE / WEIGHT
Max size W x H x D (mm/inch): 130 x 37 x 88.3 / 5.12 x 1.45 x 3.48
Weight (kg/lb): 0.66 / 1.45
10