Owner's Manual

Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - www.elettromedia.it
All Specifications Subject to Change Without Notice_16.A
5
Power Supply
Inputs / Outputs / Filter
Size / Weight
Configurations
Amplifier Stage
Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 25 A
Idling current (power ON/OFF): 1 A / 0.04 mA
Consumption @ 2 Ω, 14.4 VDC
(Max Musical Power): 25 A
Remote In: 7 ÷ 15 VDC - 1 mA
ART: Automatic Remote Turn-On/Off with Speaker-In
INPUTS: PRE IN / SPEAKER IN
Pre out Hi-Pass: 50 ÷ 250 Hz @ 12 dB/Oct.
Filters FULL: Yes
Lo-Pass: 50 ÷ 250 Hz @ 24 dB/Oct.
SUBSONIC (on/off): 25 Hz @ 24 dB/Oct.
BOOST 50 Hz (adjust): (0 ÷ 12) dB
PHASE (adjust): (0 ÷ 180) deg
Remote Volume Control (adjust): (-50 ÷ 6) dB
Max size (mm / in.): 215 x 190 x 50 / 8.46 x 7.48 x 1.97
Weight (kg / lb.): 1,94 / 4.27
Speaker Output Pre Output
Features:
Distorsion - THD (100 Hz @ 4 Ω): 0.2 %
Bandwidth: 10 ÷ 22k Hz
S/N Ratio (A weighted @ 1 V): 100 dB
Damping factor (100 Hz @ 4 Ω): 80
Pre-In sensitivity: 0.2 ÷ 5 VRMS
Speaker-In sensitivity: 0.8 ÷ 20 VRMS
Load impedance (MIN): 2 Ω
Output Power (RMS) @ 14.4 VDC, THD 1%:
1 Ch: 320 W x 1 (4 Ω)
1 Ch: 550 W x 1 (2 Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch: 380 W x 1 (4 Ω)
1 Ch: 700 W x 1 (2 Ω)
CEA 2006-A Ratings:
RMS Power
(4 Ω, ≤ 1 %THD + N, 14.4 V): 300 W x 1 Ch
S/N Ratio (ref. 1 W output): 80 dBA
1. Compact design built from extruded aluminum heatsink with the top side
ensuring effective transfer of the heat.
2. Special balanced high-noise rejection input circuitry on the Pre-In or
Speaker-In inputs.
3. Speaker-In (for OEM head units) and RCA-In (for Aftermarket head units) inputs.
4. Selectable ART, Automatic Remote Turn-On/Off function, automatically turns
on and off the amplifier when the OEM radio turns on and off
(can be enabled/disabled, with only Speaker-In inputs).
5. Power supply featuring multiple winding transformer, Low-ESR 105°C capacitors,
D-Class 2 Ω stable output stage.
6. Pre-outs, also available when using Speaker-In level inputs, equipped with Hi-Pass
filter with adjustable 12 dB/Oct. slope with continuity between 50 and 250 Hz,
providing the ability to create Front + Sub multi-amplification active systems.
7. Selectable full range power output, for dual-mono powerful audio systems.
8. Bass Boost (50 Hz) adjustable to 12 dB, to increase the subwoofer punch.
9. 24 dB continuous adjustable (50 to 250 Hz) Lo-Pass filter.
10. SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies
from music signal to prevent damage to the subwoofer.
11. Continuous adjustable PHASE control (0 to 180°); it optimizes alignment of
woofer bass frequencies with sub ones.
12. Optional Remote Volume Control (HRC); providing the ability to adjust
subwoofer volume level from the dashboard.
HCP 1D
1400 W
MAX POWER
MONO D-CLASS AMPLIFIER WITH CROSSOVER
25
Hz
Hz
LO-PASS 24 dB
SUBSONIC 24 dB
Hz
HI PASS 12 dB
Hz
FULL
Hz
SUBSONIC 24 dB +
LOPASS 24 dB
50÷250
25
25
50÷250
50÷250
HRC
OPTIONAL