HCP HCP QUICK START GUIDE AMPLIFIER www.hertzaudiovideo.com Il Manuale Utente è disponibile anche sul nostro sito www.hertzaudiovideo.com The User Manual is also available from our web site www.hertzaudiovideo.
HCP Index 1. PRECAUTIONS ....................................................................................................................................................06 2. INSTALLATION AND SIZES ................................................................................................................................32 3. CABLE SIZE CALCULATION TABLES. 1: POWER SUPPLY / 2: SPEAKERS ....................................................32 4. POWER SUPPLY and REMOTE IN CONNECTION / FUSE REPLACEMENT.
Quick Start Guide 1. PRECAUTIONS English / English Before installing the components, please carefully read all of the instructions contained in this manual. It is advisable to carefully follow the highlighted instructions. Failure to respect these instructions may cause unintentional harm or damage to the components. SAFETY CONSIDERATIONS 1. Make sure your car has 12 VDC voltage negative ground electric system. 2.
HCP 2. INSTALLATION AND SIZES B A B C D E HCP 1D 215 8.46 200 7.87 190 7.48 166 6.53 50 1.97 mm in. HCP 2 215 8.46 200 7.87 190 7.48 166 6.53 50 1.97 mm in. HCP 4 315 12.40 291 11.45 190 7.48 166 6.53 50 1.97 mm in. HCP 4D 215 8.46 200 7.87 190 7.48 166 6.53 50 1.97 mm in. HCP 5D 345 13.58 321 12.64 190 7.48 166 6.53 50 1.97 mm in. A D C E 3.
Quick Start Guide 4. POWER SUPPLY and REMOTE IN CONNECTION /FUSE REPLACEMENT GND REM +12V FUSE FUSE REPLACE WARNING: firmly press contacts of each fuse into their fuse-holder clips POWER 20 APPLY A FUSE CLOSE TO BATTERY POSITIVE POLE TO PROTECT BATTERY CABLE GND AMPLIFIER FUSE (see Tech. Spec.) 16 mm / 0.62 in. REMOTE OUT FUSE POWER SUPPLY 12 mm / 0.47 in. CAR BATTERY SOURCE REMOTE GND 5.
HCP 6.
Quick Start Guide HCP 4D If using FRONT INPUT only, select: If using REAR INPUT select: OFF ON R HI-LEVEL OUTPUT FOR EACH INPUT (FRONT - REAR) USE PRE-IN OR HI-IN: NOT BOTH HI-IN HI-IN FRONT REAR SOURCE PRE OUT (FRONT CHANNELS) R PRE IN FRONT HCP 5D L PRE OUTPUT L PRE IN REAR If using FRONT INPUT only, select: WARNING: Using 3CH mode REAR INPUT is not available If using REAR INPUT select: OFF If using SUB INPUT, ON select: ON If NOT using SUB INPUT, OFF select: R HI-LEVEL OUTPUT FOR
HCP 7.
Quick Start Guide HCP 4 / HCP 4D ON INPUT L R HCP 5D INPUT L R ON : Not AVAILABLE : Set-up CONTROLS : Adjustment CONTROLS 37
HCP 8. INSTALLATION EXAMPLES 1CH: FILTERED SUBWOOFER INPUTS: HCP 1D SUB LO PASS SUB LEVEL ON USE PRE-IN OR HI-IN INPUT INPUT L R R SOURCE L OUTPUTS: 12 mm / 0.62 in.
Quick Start Guide 1CH: FULL RANGE - SINGLE CHANNEL INPUTS: HCP 1D LEVEL OFF USE PRE-IN OR HI-IN INPUT INPUT L R R SOURCE L OUTPUTS: FULL RANGE SYSTEM MONO : Not AVAILABLE : Set-up CONTROLS 12 mm / 0.62 in.
HCP 2CH: FRONT L / R INPUTS: HCP 2 FRONT LEVELS HI 80 OFF USE PRE-IN OR HI-IN INPUT INPUT L R R SOURCE L OUTPUTS: 12 mm / 0.62 in.
Quick Start Guide 1CH: SUBWOOFER L+R INPUTS: HCP 2 SUB LEVEL OFF USE PRE-IN OR HI-IN INPUT SUB LO PASS LO INPUT L R R SOURCE L OUTPUTS: 12 mm / 0.62 in.
HCP 1CH: SUBWOOFER - MONO INPUT INPUTS: HCP 2 ON FULL SUB LEVEL AUDIO PROCESSOR SUBWOOFER CHANNEL OUTPUTS: 12 mm / 0.62 in.
Quick Start Guide 4CH: FRONT + REAR INPUTS: HCP 4 FRONT LEVELS HI 80 OFF HI 80 FRONT INPUT OFF OFF REAR LEVELS FRONT INPUT USE PRE-IN OR HI-IN OFF L R R SOURCE L Using also REAR INPUTS: ON REAR INPUT activate REAR INPUT REAR INPUT USE PRE-IN OR HI-IN OUTPUTS: L R FRONT REAR 12 mm / 0.62 in.
HCP 3CH: FRONT + SUB INPUTS: HCP 4 FRONT LEVELS OFF USE PRE-IN OR HI-IN FRONT INPUT HI 80 OFF LO OFF SUB FRONT INPUT LEVEL LO PASS L R R SOURCE L Using also REAR INPUTS to drive SUBWOOFER: ON SUB INPUT SUB INPUT activate REAR INPUT USE PRE-IN OR HI-IN OUTPUTS: SUBWOOFER (L+R) 12 mm / 0.62 in.
Quick Start Guide 2CH: LEFT / RIGHT INPUTS: HCP 4 L LEVEL ON L HI 80 ON HI 80 ON L R LEVEL L R R SOURCE L USE PRE-IN OR HI-IN OUTPUTS: 12 mm / 0.62 in.
HCP 4CH: FRONT + REAR INPUTS: HCP 4D LEVELS OFF USE PRE-IN OR HI-IN FRONT INPUT FRONT INPUT FRONT HI-PASS HI OFF HI OFF REAR LEVEL HI-PASS L R R SOURCE L Using also REAR INPUTS: ON REAR INPUT REAR INPUT activate REAR INPUT USE PRE-IN OR HI-IN OUTPUTS: L R FRONT REAR 12 mm / 0.62 in.
Quick Start Guide 4CH: WOOFER + MID/HI INPUTS: HCP 4D MID/HI HI-PASS LEVELS OFF USE PRE-IN OR HI-IN FRONT INPUT FRONT INPUT LEVELS HI OFF LO OFF WOOFER LO-PASS L R R SOURCE L OUTPUTS: PASSIVE FILTERS L R MID / HI WOOFER L R PASSIVE FILTERS 12 mm / 0.62 in.
HCP 3CH: FRONT + SUB INPUTS: HCP 4D LEVELS OFF USE PRE-IN OR HI-IN FRONT INPUT FRONT INPUT LEVEL MID/HI HI-PASS HI OFF LO OFF SUBWOOFER LO-PASS L R R SOURCE L Using also REAR INPUTS to drive SUBWOOFER: ON activate REAR INPUT SUB INPUT SUB INPUT USE PRE-IN OR HI-IN OUTPUTS: SUBWOOFER (L+R) PASSIVE FILTERS FRONT 12 mm / 0.62 in.
Quick Start Guide 2CH: LEFT / RIGHT INPUTS: HCP 4D L LEVEL HI-PASS ON L L HI ON HI ON R LEVEL L HI-PASS R R SOURCE L USE PRE-IN OR HI-IN OUTPUTS: 12 mm / 0.62 in.
HCP 5CH: FRONT + REAR + SUB INPUTS: HCP 5D LEVELS HI FRONT HI-PASS X1 LEVELS 5CH REAR HI-PASS OFF HI OFF FRONT INPUT USE PRE-IN OR HI-IN FRONT INPUT LEVEL L R SUBWOOFER LO-PASS R SOURCE L Using also REAR / SUB INPUTS: ON ON activate SUB INPUT REAR INPUT REAR INPUT SUB INPUT activate REAR INPUT SUB INPUT USE PRE-IN OR HI-IN OUTPUTS: SUBWOOFER L R FRONT R 12 mm / 0.62 in.
Quick Start Guide 5CH: WOOFER + TWEETER + SUB INPUTS: HCP 5D TWEETER LEVELS HI-PASS LO-PASS HI X10 WOOFER LEVELS HI-PASS 5CH BAND OFF USE PRE-IN OR HI-IN LEVEL L R SUBWOOFER LO-PASS R SOURCE L OUTPUTS: SUBWOOFER L R TWEETER WOOFER R L 12 mm / 0.62 in.
HCP 3CH: FRONT + SUB INPUTS: HCP 5D LEVELS HI FRONT HI-PASS 3CH X1 OFF USE PRE-IN OR HI-IN LEVEL L R SUBWOOFER LO-PASS R SOURCE L OUTPUTS: SUBWOOFER L 12 mm / 0.62 in.
HI-IN +6dB INPUT (1.5 - 12V) PREOUT (0.6 - 5V) RCA prot HRC (optional) OFF (L - MONO IN) R L 0 dB RCA prot R L L R L R ART AUTO TURN ON OFF ON SUB Volume REMOTE CONTROL HI-PASS 50 Hz 250 12 dB AUTO TURN ON OFF ON LEVEL MIN MAX LEVELS MIN MAX to REMOTE IN L+R to REMOTE IN 80 Hz 12 dB LO-PASS 50 Hz 250 LO-PASS 50 Hz 500 12 dB HI-PASS VCA 24 dB PASS MODE HI FULL LO FILTER OFF ON 180 Deg.
54 (0.6 - 5V) PRE-IN (L - MONO IN) REAR IN (1.5 - 12V) HI-IN PREOUT (0.6 - 5V) PRE-IN (L - MONO IN) FRONT IN (1.
HI-IN (0.6 - 5V) PRE-IN (L - MONO IN) REAR IN (1.5 - 12V) HI-IN PREOUT (0.6 - 5V) PRE-IN (L - MONO IN) FRONT IN (1.5 - 12V) RCA prot RCA prot L R L R L R ART REAR IN OFF ON (REAR) AUTO TURN ON OFF ON Hz 3.2k FILTER LEVELS 3.
56 HI-IN (0.6 - 5V) PRE-IN SUB IN (1.5 - 12V) HI-IN (0.6 - 5V) PRE-IN REAR IN (1.5 - 12V) HI-IN (0.6 - 5V) PRE-IN (3CH IN) FRONT IN (1.
Quick Start Guide 10. TECHNICAL SPECIFICATIONS HCP 1D HCP 2 Power Supply Power Supply Power supply voltage / fuse: 11÷15 VDC / 2 x 25 A Idling current (power ON/OFF): 1 A / 0.04 mA Consumption @ 2Ω, 14.4 VDC (Max Musical Power): 25 A 7 ÷ 15 VDC - 1 mA Remote In: ART: Automatic Remote Turn-On/Off with Speaker-In Amplifier Stage Power supply voltage / fuse: 11÷15 VDC / 1 x 20 A Idling current (power ON/OFF): 0. 4 A / 0.04 mA Consumption @ 2Ω, 14.
HCP HCP 4 HCP 4D Power Supply Power Supply Power supply voltage / fuse: 11÷15 VDC / 2 x 20 A Idling current (power ON/OFF): 1 A / 0.04 mA Consumption @ 2Ω, 14.4 VDC (Max Musical Power): 21 A 7 ÷ 15 VDC - 1 mA Remote In: ART: Automatic Remote Turn-On/Off with Speaker-In Power supply voltage / fuse: 11÷15 VDC / 2 x 20 A Idling current (power ON/OFF): 1.6 A / 0.04 mA Consumption @ 2Ω, 14.
Quick Start Guide HCP 5D Power Supply Power supply voltage / fuse: 11÷15 VDC / 2 x 25 A Idling current (power ON/OFF): 2 A / 0.04 mA Consumption @ 2Ω, 14.4 VDC (Max Musical Power): 30 A 7 ÷ 15 VDC - 1 mA Remote In: ART: Automatic Remote Turn-On/Off with Speaker-In Amplifier Stage Features: Distorsion - THD (100 Hz @ 4Ω): 0.
All Specifications Subject to Change Without Notice FFL043_REV.F PART OF ELETTROMEDIA - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.
HCP 1D 1400 W MAX POWER MONO D-CLASS AMPLIFIER WITH CROSSOVER HRC Power Supply OPTIONAL 11 ÷ 15 VDC / 2 x 25 A Power supply voltage / fuse: Idling current (power ON/OFF): 1 A / 0.04 mA Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 25 A 7 ÷ 15 VDC - 1 mA Remote In: ART: Automatic Remote Turn-On/Off with Speaker-In Amplifier Stage Features: Distorsion - THD (100 Hz @ 4 Ω): 0.2 % 10 ÷ 22k Hz Bandwidth: S/N Ratio (A weighted @ 1 V): 100 dB Damping factor (100 Hz @ 4 Ω): 80 0.
