Specifications

Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - www.elettromedia.it
All Specifications Subject to Change Without Notice_17.A
10
www.hertzaudiovideo.com
A 237,5 mm 9.35 in.
B 225 mm 8.86 in.
C 103 mm 4.06 in.
D 85 mm 3.35 in.
E 268 mm 10.55 in.
F 28,5 mm 1.12 in.
CPX 690
COAX
360 W
ELECTRO-ACOUSTIC PARAMETERS
D mm 172
Xmax mm 5
Re Ω 3,1
Fs Hz 60
Le mH 0,571
Vas I 21,43
Mms g 25
Cms mm/N 0,28
BL
T•m
6,28
Qts 0,61
Qes 0,74
Qms 3,5
Spl dB 94
TECHNICAL SPECIFICATIONS
Component Three way coaxial
Size
Woofer (in.) 6 x 9
Tweeter diaphragm
mm (in.) 32 (1.26)
Supertweeter diaphragm mm (in.) 24 (0.9)
Voice Coil Ø
Woofer mm (in.) 30 (1.2)
Tweeter mm (in.) 28 (1.1)
Supertweeter mm (in.) 20 (0.8)
Power Handling
W peak 360
W continuos 120
Impedance Ω 4
Frequence Response Hz 35 ÷ 24k
Crossover Integrated 4 k/10k Hz @ 6 dB Oct.
Woofer Magnet size
D x d x h
mm
(in.)
90 x 40 x 20
(3.54 x 1.57 x 0.79)
Weight of one speaker kg (lb.) 4.05 (8.93)
Woofer Magnet Ferrite
Tweeter Magnet Neodymium
Cone Water repellent pressed paper
Dome Tetolon
Xmech mm (in.) 7,5 (0.3)
1. Pressed paper cone with FEM-optimized geometry combining rigidity and
lightness for color-free sound.
2. Wide rubber suspension designed for a long excursion and excellent sound
damping.
3. High density ferrite magnet in combination with low carbon polar plates for
a reduced distortion at high power levels.
4. Metal finished basket combined with an anti-vibration rubber magnet cover
for an overall damping of spurious vibrations.
5. Soft Tetolon fiber dome Neodimium tweeter featuring a 28 mm mobile voice
coil, for a distortion-free reproduction of mid-high frequencies.
6. Tetolon fiber Neodimium Supertweeter featuring a 20 mm mobile voice
coil, to compensate for the natural fall of high frequency response in
horizontal installations.
7. Faceplate geometry optimized with FEM (Finite Element Modeling)
technology for a linear frequency response in off-axis installations..
8. Stylish grille with high resistance ABS plastic frame with metal finish
combined with a protective metallic mesh.
Optional
F
E
A
C
B
D