Technical Data Sheet

Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - elettromedia.com
All Specifications Subject to Change Without Notice_18.A
11
hertzaudiovideo.com
CK 130
TWO WAY SYSTEM
210 W
C 26:
1. Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a
natural and yet detailed reproduction of musical nuances.
2. Neodymium magnet with high-density magnetic flux, optimized for maximum
control during high-energy dynamic transients in the mid-high frequency
range.
3. Faceplate geometry optimized with FEM (Finite Element Modeling) technique
for a linear frequency response in off-axis installations.
4. Wide range of accessories, for easy integration in OEM placements.
C 130:
1. 130 mm (5 in.) semi-pressed paper cone SPP-M (Semi Pressed Paper-Mica)
enhanced with Mica powder for an excellent balance between lightness and
damping.
2. High-density flux ferrite magnet combined with low-carbon polar plates for
reduced distortion at high power levels.
3. 25 mm (1 in.) voice coil featuring an aluminum former to guarantee high
excursion and power handling.
4. Compact and transparent three-spoke basket acoustically combined with a
rubber magnet cover for total damping of spurious vibrations.
5. Provided elegant grille made with high-resistance ABS plastic structure with a
metallic finish combined with a protective metal mesh.
CCX 2:
1. Tweeter level adjustment through a three-position switch (0, +3 dB) for an
optimal tone balance that can be customized by the user.
2. Low-loss factor capacitors and low resistance inductances made with pure
copper, for maximum sound transparency and clear high frequencies.
3. Compact design with metallic finish for an easy installation, with air vents for
efficient heat dissipation.
TECHNICAL SPECIFICATIONS
Component 2-way system
Size
Woofer mm (in.) 130 (5)
Tweeter diaphragm mm (in.) 26 (1)
Voice Coil Ø
Woofer mm (in.) 25 (1)
Tweeter mm (in.) 20 (0.8)
Power Handling
W peak 210
W continuos 70
Sensitivity dB SPL 92,5
Impedance Ω 4
Frequency
Response
Hz 65 ÷ 22,5k
Crossover Type - Cut off 2,5 kHz @ 12 dB Oct.
Adjustment Tweeter Level 0 / +3dB
Weight of one component
Woofer kg (lb) 0,7 (1.54)
Tweeter kg (lb) 0,03 (0.07)
Crossover kg (lb) 0,185 (0.41)
ELECTRO-ACOUSTIC
PARAMETERS C 26 C 130
D mm 26 110
Xmax mm - 3,1
Re Ω 3,7 3,1
Fs Hz 1500 80
Le mH 0,02 0,17
Vas I - 6,30
Mms g 0,17 8
Cms mm/N 0,07 0,50
BL
T•m
1,3 4,1
Qts 1,59 0,61
Qes 3,51 0,72
Qms 2,9 3,9
Spl dB 92 92,5